Hi,

Which cable did you use to connect AE to A.Aux?

Have a look here: link or link

Forget it - it won't work.

Just connect the AE to an analog-sound-in-socket on the Avant.

Or  - even better - use one of the digital-in's (you will then need a small "toslink to coax-converter").

Greetings Millemissen

It works - If done correctly, I've done already.

Avant offers video sources - it's not the best way to integrate audio sources as video sources.

hfat

Avant should be set to V.OPT 2. You will need a BL converter 1611 (there is no converter with PC in, I think you are talking about BL active(?).

If you have a Beo audio device - Beocord, Beogram... - you could check the setup using the DIN plug of that product.

Stefan

Hi, thanks for the replies - I'll try again tonight with the avant in V.Opt2 - I think it is set to 1 at the moment - do I leave the Beovision 3 in my bedroom at 6? thanks again, it would be great if it did work. I thought about using the avant for audio, but 1 of the digital sockets is used by the DVD player and the other by apple tv, so best if I can get it working this way.

Hi, thanks for the replies - I'll try again tonight with the avant in V.Opt2 - I think it is set to 1 at the moment - do I leave the Beovision 3 in my bedroom at 6? thanks again, it would be great if it did work. I thought about using the avant for audio, but 1 of the digital sockets is used by the DVD player and the other by apple tv, so best if I can get it working this way.

I think your Avant is already set to V.OPT2, because you said "CD" will be displayed on your Avant, wouldn`t do if it was set to V.OPT1....

V.OPT6 for your link TV is ok. so it will receive video- and audio commands in slave mode.

I`d try to select other audio modes too if "CD" doesn`t work, maybe A.AUX or A:TAPE (A.MEM).

And maybe it helps if you disconnect your Avant from the mains for 5-10 minutes and reconnect ?

Which cable are you using to connect AE and BL converter?

Maybe wiring/soldering are faulty?

Good luck

Stefan

Hi, have just got it working - I set the Avant to Video Option 2, still no sound, then tried a DIN to 4 phono lead and tested the ends - two produced a buzz, plugged those into the DAC which is fed from the AE - and glorious music - it works on CD, Radio and Tape - really pleased and cannot thank you guys enough - at last its working and the beo app gives great radio reception too. So pleased, thanks again for everyone's help.

Andrew

This is interesting... I have an unused beeline converter (1614... Is it also ok?). If I plug the headphone out of my bs5e to the aux input of the converter, should I be able to directly power on my bv8-40 on CD and speaker 2? Would be great! Can someone confirm??