Beovision Avant Service Menu

2 replies
F(
Offline
fredtmm (archived2)
Bronze
Posted July 19, 2016 at 22:08 GMT
#2065434

Hi

Did anyone already enter in the service menu in order to verify the signal information ? I've connected my 4K receiver (orange UHD) on HDMI 1 socket and choose an UHD channel and the input resolution is 3840x2160p (page 1) & output resolution only 1920x1080p (page 2)... So I don't know if I 'may really looking at 4K resolution...

To enter in the service menu : press menu then choose configuration then quickly press red then go buttons.

 

W(
Offline
w5bno123 (archived2)
Bronze
Posted July 19, 2016 at 22:19 GMT
#2065435
Hi

I asked the very same question to our tech support the other day as I also saw the same info and questioned it.

The reason that the Avant output resolution in the service menu shows 1920 x 1080 is due to the somewhat special UHD architecture we have had to implement, in which the UHD content is bypassing the media processor. Instead, the UHD content is handled in the B&O-developed FPGA. The output resolution indicated in the service menu refers to the resolution of the material that comes out of the media processor. In this case, the OSD menus. Those are generated in FHD and up-scaled to UHD in the FPGA and mixed with the UHD content from the HDMI input.
or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold