Beovision 7 MK4

19 replies
S(
Offline
seanklemis (archived)
Bronze
Posted July 28, 2010 at 16:02 GMT
#1912803

Hello All

Got my MK4 in the last few hours and been setting it all up.

wow software 9.01 has more menu's than i have ever seen on a B&o TV

some questions i have are:

Where does it show 100Hz in the menu's??

 

Also i read that there was a fix for room ehco when using devices, when in the customer service menu the ML delay is grayed out under sound adjustment.

 

Am i correct in thinking that you still need the anologue cables connected to dist sound over the ML? where is the function to adjust the echo as its still there.

 

S(
Offline
seanklemis (archived)
Bronze
Posted July 28, 2010 at 17:26 GMT
#1912804

Anyone??

Its the most busy night of the week

V(
Offline
Vienna (archived)
Bronze
Posted July 28, 2010 at 18:30 GMT
#1912805

Seanie_230 wrote:

Also i read that there was a fix for room ehco when using devices, when in the customer service menu the ML delay is grayed out under sound adjustment.

AST has to be enabled to access these settings.

S(
Offline
seanklemis (archived)
Bronze
Posted July 28, 2010 at 18:38 GMT
#1912806

How do i enable that?

 

also

when watching sky hd the signal info shows as 50Hz and when i put a bluray on it changes to 47.99Hz.

Is the MK4 supposed to display 100Hz as i read in the software thread???

 

V(
Offline
Vienna (archived)
Bronze
Posted July 28, 2010 at 18:59 GMT
#1912807

Seanie_230 wrote:

How do i enable that?

menue > options > sound > AST ON/OFF

AST thread: /forum/general-discussion-and-questions/ast-help-amp-understanding#post-1906146

 

V(
Offline
Vienna (archived)
Bronze
Posted July 28, 2010 at 19:12 GMT
#1912808

Seanie_230 wrote:

Is the MK4 supposed to display 100Hz as i read in the software thread???

In your "Customer Service Menue" you'll find "Panel Output" and "100" for a MK4
("200" when it's a MK5)

! This is the frequency of the panel ! 

Your figures of 50/47,99 are the frequencies for the "raw=incoming" signal before processing.
(the same figures would also be displayed on a MK5) 

S(
Offline
seanklemis (archived)
Bronze
Posted July 29, 2010 at 03:37 GMT
#1912809

OK

i have found panel output and it shows 50Hz also.

I dont seem to have the AST menu under sound???

does anyone have the type numbers for this TV??

Please help!

F(
Offline
fishta (archived)
Bronze
Posted July 29, 2010 at 03:40 GMT
#1912810

On both of those basis, the fact you don't have the AST function and its telling you its only 100Hz I would say that you are on very old software not 9.01 as you thought or you have been sold a MK3 with Blu-Ray Retrofit.

Hopefully its the old software as that can be fixed!

S(
Offline
seanklemis (archived)
Bronze
Posted July 29, 2010 at 03:52 GMT
#1912811

Hz Issue

Software i have is 100% 9.01, and its saying 50Hz not 100 as i understand that the software fixed a bug showing 50Hz on 100Hz panels years ago.

AST

In menu options ? sound i have speaker type etc etc but no AST option.

 

V(
Offline
Vienna (archived)
Bronze
Posted July 29, 2010 at 04:16 GMT
#1912812

Seanie_230 wrote:

Hz Issue

Software i have is 100% 9.01, and its saying 50Hz not 100 as i understand that the software fixed a bug showing 50Hz on 100Hz panels years ago.

AST

In menu options ? sound i have speaker type etc etc but no AST option. 

The header of your posting says it's a "MK4 question" 
but your questions/answers indicate you have a MK3 (or earlier) version ...

The 4-digit type # or the serial # would tell ...

or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold