Beovision 7-40 no picture with PS4, but picture with ATV3

17 replies
Leosgonewild
Offline
Leosgonewild
Bronze
Posted May 13, 2015 at 14:33 GMT
#2041634

I have had my PS4 connected to my BV7-40 mk2, and had no problems with it.

Today I did a reset of the BV7, since I had some issues with speakers.

Now I cannot get a picture from the PS4 anymore. If I connect my ATV3 I get picture without a problem. I even took the PS4 to my neighbour to set it to 720, but still no luck. 

 

Any suggestions? I think it is very strange that it doesnt accept the PS4 when it accepts the ATV3.

 

THe settings are DTV-A1 (dvi-input). Even tried with v.mem, but still no luck.

B(
Offline
BeoMotion (archived2)
Bronze
Posted May 13, 2015 at 16:20 GMT
#2041635

Had the same problem with a PS3 and a BV7-40 MK2.

Everything worked fine until that one day when I did a factory reset.
All other devices (ATV2 + STB) connected via a HDMI switch worked flawlessly. Only the PS3 never showed a picture on that TV again.
I tried at least 5 different HDMI cables with different DVI adaptors with and without the HDMI switch. No chance.
On all other TVs the PS3 worked without any problems. 

Curious whether there are others with the same problem and maybe a solution...
Might be a corrupted EDID EEPROM. But why is the ATV working...?

BR,
BeoMotion. 

Leosgonewild
Offline
Leosgonewild
Bronze
Posted May 13, 2015 at 16:23 GMT
#2041636
And you never got it working again? 😉

Maybe I should try putting my germ hdmi expander between the systems.

But I was so happy I got rid of it.
Millemis
Offline
Millemis
Bronze
Posted May 13, 2015 at 16:29 GMT
#2041637

Handshake problems!

Plug it out/in a couple of times. Turn of/onthe power of the tv. Plug it out/in again.

Might some times help.

MM

Location: Flensborg————Danmark

B(
Offline
BeoMotion (archived2)
Bronze
Posted May 13, 2015 at 16:37 GMT
#2041638

Millemissen wrote:
Plug it out/in a couple of times. Turn of/onthe power of the tv. Plug it out/in again.

In my case I really tried everything. Plugging in/out very often in different states of the devices. TV on / PS off / PS powercycle / TV powercycle / PS on. In a lot of combinations. Nothing helped. 
I also resetted the PS3 several times and tried a special "resolution savemode".

No chance. Never got it working again on that TV! :-( 

Leosgonewild
Offline
Leosgonewild
Bronze
Posted May 13, 2015 at 16:41 GMT
#2041639
I got picture a couple of time. But now it is not coming back.
B(
Offline
BeoMotion (archived2)
Bronze
Posted May 13, 2015 at 16:42 GMT
#2041640

leosgonewild wrote:
Maybe I should try putting my germ hdmi expander between the systems.

I my case this didn't work either.

B(
Offline
BeoMotion (archived2)
Bronze
Posted May 13, 2015 at 16:45 GMT
#2041641

leosgonewild wrote:
I got picture a couple of time. But now it is not coming back.

If I remember right this was the same case with my BV7. 
I really hope that you are able to find a solution for your setup. 

M(
Offline
MCB (archived2)
Bronze
Posted May 13, 2015 at 17:15 GMT
#2041642

HDCP error?

Check customer service menu -> adjustment -> HDTV -> HDMI.

V/ Mikkel

 

B(
Offline
BeoMotion (archived2)
Bronze
Posted May 13, 2015 at 17:21 GMT
#2041643

MCB wrote:
HDCP error?

Check customer service menu -> adjustment -> HDTV -> HDMI.

Tried both, HDMI and DVI mode. Nothing worked.

or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold