Which ports did you connect it to, and what Beo4 command did you use ?

I hope you are using a LINE level signal from the SONOS ?

I have connected it to av2 with an scart converter and i am using a line level signal to port a1..

But i am not sure how to config the Beo 4 remote... I am relatively new to tha B&O world :)

Normann wrote:

I have connected it to av2 with an scart converter and i am using a line level signal to port a1..

But i am not sure how to config the Beo 4 remote... I am relatively new to tha B&O world :)

When you assigned it to AV2 you would have linked a source name to it.

Something like this section of the BV7-40 manual ... and then you need to add the same source name to the Beo4.

Adding the source name to the Beo4 is easy:

1. simultaneously press [LIST] and stand-by (the orange dot)
2. You will see a prompt on the Beo4's screen: "ADD ?"
3. Press (GO)
4. Then press [LIST] [LIST] ... until you get to the source name you have chosen
5. Then press (GO)
6. Now you can press [LIST] and you will see the source name displayed, you press (GO), and the BV7 will switch to the AV associated with that source name
7. Since you will be using music only, you probably will want to add [P-MUTE] to your Beo4 using the above procedure so that you can "mute" the picture i.e. turn off the LCD but leave the speakers running 🙂

Now i have done all you describe so well, but i still don't get any sound :(

I connected it to AV2 and assigned the name V-aux, and add this button to the Beo4 remote.. The Tv change to the right channel when i choose the V-Aux, but as mention no sound...

Is my beovision to old? It shouldn't have something to do with that, should it?

Normann wrote:

I have connected it to av2 with an scart converter and i am using a line level signal to port a1..

Your TV expects a digital signal and disables the sound from your AV2 port.

In your connection menu, disable your A1 port and set it to NONE. 

DoubleU wrote:

Normann wrote:

I have connected it to av2 with an scart converter and i am using a line level signal to port a1..

Your TV expects a digital signal and disables the sound from your AV2 port.

In your connection menu, disable your A1 port and set it to NONE. 

I have noe diable the A1port, but still no sound.. I think this is strange.. 😮

Normann wrote:

DoubleU wrote:

Normann wrote:

I have connected it to av2 with an scart converter and i am using a line level signal to port a1..

Your TV expects a digital signal and disables the sound from your AV2 port.

In your connection menu, disable your A1 port and set it to NONE. 

I have noe diable the A1port, but still no sound.. I think this is strange.. 😮

I think the interface is expecting to see a video signal to indicate that the source is alive before it activates the audio processing 🙁

I don't have a BV7 myself, nor a BV7-32 manual (I am using a -40 one to advise you)

But can you try AV5 or AV6 ?

AV5 might work as [PC]

AV6 will respond to the [CAMERA] command - and might work.

It could be that the BV7 is too "smart" (or tricky!) to be fooled into just processing an audio signal 🙁

Here is where to locate the "camera" inputs ....

I have on the 7-32 just 3 AV input and one for camera.. I shall try the camera option, the problem here is that i can not program the Beo4 with an camera button... This is the first Beovision 7, so it don't have ant digital/hdmi ports.. But it should still work, shouldn't it?