BeoVision 4-50 Table Stand

15 replies
8(
Offline
8000Kristian (archived2)
Bronze
Posted June 30, 2016 at 18:01 GMT
#2064684

Last week i did a complete bargain on a wallmounted BeoVision 4-50. But i don't want to mount it on a wall. I have an old B&O F1000 furniture i want to put it on. 

And here is my question..

Do anybody here on BeoWorld have a used Table Stand for the BeoVision 4? The two dealers in my town couldn't sell me one. So i should either find a used one, or make one myself. 

As i'm living in Denmark, and they are extremely hard to find here, i've prepared myself to make one on my own. 

If anybody here have made their own Table Stand for a BeoVision 4, i would be very pleased to see it!

 

BTW is there a smart solution to upload pictures from an iPad, to the thread?

B(
Offline
BEOVOX141 (archived2)
Bronze
Posted June 30, 2016 at 18:33 GMT
#2064685

The BV4-50 comes in at a whopping 50kg!

Which made me think,- Why not take the base from an old Avant. The center of gravity should be about the same, and the MDF chassis is not only rock solid, but also very easy to modify! The motor assembly is no more than 2 inches high, and would look great as a tabel stand!

I have made several stands from recyled Beovison parts, AV9000 , BV7-32 and the Avant

If you need parts let me know :-)

 

kallasr
Offline
kallasr
BronzeFounder
Posted June 30, 2016 at 18:48 GMT
#2064686
Try to find out what Panasonic pedestal will fit.

It is a Panasonic Professional display under the B&O frame....

Did so with my Beovision 4-42 (bought a defect Panasonic display with base just to get the stand 😁).

Ralf

My B&O Icons:

BeoCenter-9500.png BeoCenter-9500.png
Beoremote-Beo4.png Beoremote-Beo4.png
Beovision-11.png Beovision-11.png
Beosound.png Beosound.png
Beoplay-V1.png Beoplay-V1.png
Beoplay-H95.png Beoplay-H95.png
Beoplay-E8.png Beoplay-E8.png
Beoplay-A1.png Beoplay-A1.png
Living Room: Beosystem 4, Beolab 7-2 (Center), Beolab 9 (Fronts), Beolab 8000 (Rears), Screen: Sony KD-85XH9096
Home Cinema: Beosystem 4, Beolab 7-4 (Center), Beolab 9 (Fronts), Beolab 4000 (Rears). Projector: Sony VPL-HW55
Home Office: BeoVision 11-46, 4 x Beolab 3, BeoCenter 9300 (BLC 1611/ML/NL)
Bedroom: Sony KD-65XH9077, Beosound Essence MK II with Beolab 6002 and Beolab 11 (all white, wall-mounted)
Dart Room: BeoPlay V1-40 on floor stand
Guest Room: BeoVision 7-40 MK IV, Beolab 7-2, BeoSound Ouverture
B(
Offline
berger (archived2)
Bronze
Posted July 1, 2016 at 13:18 GMT
#2064687

I scrapped a 4-50, it was only the silver frame around the tv and a back frame around the edge too..  The whole back of the TV is how the Panasonic would appear.

8(
Offline
8000Kristian (archived2)
Bronze
Posted July 1, 2016 at 13:58 GMT
#2064688
kallasr wrote:

Try to find out what Panasonic pedestal will fit.

It is a Panasonic Professional display under the B&O frame....

Did so with my Beovision 4-42 (bought a defect Panasonic display with base just to get the stand ).

After some searching i found out that the Plasma panel in my BV4 is a D9, how do i find out which Panasonic displays used the D9 panel? 🙂
8(
Offline
8000Kristian (archived2)
Bronze
Posted July 1, 2016 at 14:00 GMT
#2064689
BEOVOX141 wrote:

The BV4-50 comes in at a whopping 50kg!

Which made me think,- Why not take the base from an old Avant. The center of gravity should be about the same, and the MDF chassis is not only rock solid, but also very easy to modify! The motor assembly is no more than 2 inches high, and would look great as a tabel stand!

I have made several stands from recyled Beovison parts, AV9000 , BV7-32 and the Avant

If you need parts let me know :-)

I'm thinking about doing that as you suggested. I love the flat disc of the floor stand, so that could very well be the solution if it's going to be a DIY project.
kallasr
Offline
kallasr
BronzeFounder
Posted July 1, 2016 at 14:18 GMT
#2064690

My B&O Icons:

BeoCenter-9500.png BeoCenter-9500.png
Beoremote-Beo4.png Beoremote-Beo4.png
Beovision-11.png Beovision-11.png
Beosound.png Beosound.png
Beoplay-V1.png Beoplay-V1.png
Beoplay-H95.png Beoplay-H95.png
Beoplay-E8.png Beoplay-E8.png
Beoplay-A1.png Beoplay-A1.png
Living Room: Beosystem 4, Beolab 7-2 (Center), Beolab 9 (Fronts), Beolab 8000 (Rears), Screen: Sony KD-85XH9096
Home Cinema: Beosystem 4, Beolab 7-4 (Center), Beolab 9 (Fronts), Beolab 4000 (Rears). Projector: Sony VPL-HW55
Home Office: BeoVision 11-46, 4 x Beolab 3, BeoCenter 9300 (BLC 1611/ML/NL)
Bedroom: Sony KD-65XH9077, Beosound Essence MK II with Beolab 6002 and Beolab 11 (all white, wall-mounted)
Dart Room: BeoPlay V1-40 on floor stand
Guest Room: BeoVision 7-40 MK IV, Beolab 7-2, BeoSound Ouverture
8(
Offline
8000Kristian (archived2)
Bronze
Posted July 2, 2016 at 17:34 GMT
#2064691
kallasr wrote:

http://www.eurodocument.com/img/data/PANA_S9_UK.pdf

You can install a (second) DVI board as well to have a second HD input (did this with my Beovision 4-42)....

Thank you Ralf! That was extremely helpful. After a bit of searching i found out that the stands were quite expensive, and i'm getting closer to making a stand myself.
8(
Offline
8000Kristian (archived2)
Bronze
Posted July 7, 2016 at 15:07 GMT
#2064692
DONE!..😐

After a small email conversation with BeoVox141, I was ready to make my own table stand and decided to use the stand of an old crt avant.

I found an AV5 2 kilometers from my apartment which I picked up for about 15€. So I took it to my dads garage and started to disassemble it until I had the bare aluminum skeleton. I'm not proud of it, but the rest ended as garbage...😮

When I had the bare skeleton I bolted the wall bracket of the BV4-50 to the skeleton, and cut of approximately 10cm of the top.

And voila.. 🤩

I will make a post in the Flash your B&O thread in a couple of days..

And btw. Thanks for your help! Especially BeoVox141

Millemis
Offline
Millemis
Bronze
Posted July 7, 2016 at 15:34 GMT
#2064693

Very nice, indeed - applause again.

P.S. You 'could' have made a nice center speaker tor that tv with the AV5 speakers unit, couldn't you?

MM

Location: Flensborg————Danmark

or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold