hi,

At this point the documentation is wrong. To access the camera set up you have to:

Activate the menu

Highlight connection

at this point press menu and connections changes to camera

press go to access camera setup

hfat

Thanks hfat!

Now I can acess the Camera menu. But still I can not select PC/DVI for example. 

Can anyone tell me what to chose for settings under the service menu Plasma version setup?

Hi,

There are two things that have to match:

First you have to define a source definition in the connection menu. If you want do access your PC via PC command, you have to assign the PC(DVI) source to the decoder socket (on my bs2, yours maybe offers this source on camera socket). This makes BS2 to start up when you press PC on your Beo4/5/6.

The Video Signal passes BS2 and goes directly to the panel, socket 1. So you have to set your panel set up accordingly to:

VGA-input          PDP Slot1          PDP Slot2

VGA/YPbPr         DVI-D                None

CVBS on            CVBS on            CVBS on

Camera             DECODER             ----------

This tells BS2 to activate the Socket 1 on the panel, when the decoder socket on BS2 is active.

I use a third party panel and cannot test, but I think it will work this way.

hfat

Hi again,

Thanks a lot! I will try.

But is'nt the Decoder socket a SCART connection? Maybe i'm stupid now but I thought I should use CAMERA? As described in the manual? The Camera socket is not shown on the BS2?

:-)

HI,

I think you have no choice. I simply don't know if the documentation is wrong or it's imply a case of different SW versions. If you want to access your PC via PC command, you have to use the source definition BS2 offers. On my BS2 PC(DVI) is offered on the decoder socket, dispite of the fact that the manual states ist's available on Camera socket. In addition to your source definition SPDIF3 socket is assigned to the HD source socket. So you could use digital sound if your PC offers.

Stereo sound goes via the socket you define for your PC(DVI) source. So if you choose camera, you have to plug in your sound cable to the camera socket. If you choose decoder socket, you have to plug your stereo sound into decorder via a scart adapter. In both cases you don't have a video signal on the BS2 socket you use. If you can connect a video signal (your PC offers DVI and Video out), you could even link your PC source to other rooms (in SD quality).

hfat

Hi!

I tried both now... On my BS2 I can get PC(DVI) on both Camera and Decoder in the settings. Depending on what i define in the service menu. But still no picture. Maybe my HDMI to DVI converter does something, I don't think so but that is the only reason I can find.

I guess I need to try with a cable that's made HDMI-DVI instead of using a DVI-DVI cable with a converter as I do now?

Hi!

I am getting tiered of all this testing ❓...

I have now tried everything... I can not even get a PC/MAC signal via the VGA port!

When I do as discribed in the manual (Connection via HDMI-DVI direct to the display) and under the connections menu entered Camera (PC/DVI) I dont get any picture when pressing PC on Beo4.

I have a Mac Mini with both Mini display-port and HDMI out so I connected my Mac to an SONY LCD-screen (Mini DP-VGA) and my BV4-50 via HDMI-DVI. The funny thing is that my Mac finds the display and I am able to change resolution but still no picture att all. (I can see the picture on the SONY LCD and have set my mac to mirror the displays.

Any ideas? PLEASE 😕 💡 😁

Marcus wrote:

I have now tried everything... I can not even get a PC/MAC signal via the VGA port!

 

This is correct. The VGA input on the bs2 is pure analog (RGB) and doesn't contain any digital VESA information.

The difference with a computermonitor is, that a computer and monitor/LCD/Plasma communicate through VGA. The computer recognizes the panel by the data supplied by the monitor.

This was the reason why the first releases of the Beomaster 5 didn't work with the "older" bs2 and BV5.

Make sure that the DVI is installed in slot 1. B&O instructions let you install the DVI module in slot 2.