Beovision 11 wall mount turn capability

9 replies
M(
martinpovlsen (archived2)
Bronze
3 posts
Posted October 5, 2020 at 12:12 GMT
#2144826

Hello,

I considering a Beovision 11 - 40 for my livingroom/dining room. Part of the functional requirements is that the TV should be able to be turned 90 degrees out from the wall while on wall mount. In images and videos I have seen demos of it doing so.

 

However, I talked to a re-seller of used B&O and he said that while the wall mount can turn the TV 90 degrees it is not practical to do it on a daily basis, something about the mount not being strong enough to keep the TV at 90 degrees out from the wall even if the wall mount is motorised.

 

Can someone confirm that this is the case?

 

Best regards, 

 

Martin

Hiort
Hiort
Gold
3593 posts
Posted October 5, 2020 at 12:58 GMT
#2144827

I have a wallmounted BV11-46 with motor, and it will not go full 90 degrees from the wall.

Location: Sweden

My B&O Icons:

Beovision-11.png Beovision-11.png
Beosound-Emerge.png Beosound-Emerge.png
Beoremote-One.png Beoremote-One.png
Beoplay-M5.png Beoplay-M5.png
Beoplay-M3.png Beoplay-M3.png
Beoplay-Earset.png Beoplay-Earset.png
Beoplay-Beosound1.png Beoplay-Beosound1.png
Beoplay-A1.png Beoplay-A1.png
M(
martinpovlsen (archived2)
Bronze
3 posts
Posted October 5, 2020 at 13:07 GMT
#2144828

Thank you for the answer!

 

Is it far off 90 degrees? is it like 85 or 65?

carolpa
carolpa
Bronze
2534 posts
Posted October 5, 2020 at 13:10 GMT
#2144829

Hiort wrote:
I have a wallmounted BV11-46 with motor, and it will not go full 90 degrees from the wall.
the motorless version will go ~90 degrees.

 

Hiort
Hiort
Gold
3593 posts
Posted October 5, 2020 at 13:57 GMT
#2144830

martinpovlsen wrote:

Thank you for the answer!

 

Is it far off 90 degrees? is it like 85 or 65?

More like 80 - 85 degrees.

I have seen BV11 on the internet that swings out 90 degrees with motor. I dont know why mine cannot.

Location: Sweden

My B&O Icons:

Beovision-11.png Beovision-11.png
Beosound-Emerge.png Beosound-Emerge.png
Beoremote-One.png Beoremote-One.png
Beoplay-M5.png Beoplay-M5.png
Beoplay-M3.png Beoplay-M3.png
Beoplay-Earset.png Beoplay-Earset.png
Beoplay-Beosound1.png Beoplay-Beosound1.png
Beoplay-A1.png Beoplay-A1.png
Hiort
Hiort
Gold
3593 posts
Posted October 6, 2020 at 12:46 GMT
#2144831

Carolpa wrote:

Hiort wrote:
I have a wallmounted BV11-46 with motor, and it will not go full 90 degrees from the wall.
the motorless version will go ~90 degrees.

 

Started to think whi it cannot swing out 90 degrees with motor.

If I push the TV manually, after it swinged out max using the motor, I can move it up to 90 but there is an unpleasant "klick" noice from the motor (I assume). It can then be swinged back to the seated position using the motor.

Anyone knows? 

Location: Sweden

My B&O Icons:

Beovision-11.png Beovision-11.png
Beosound-Emerge.png Beosound-Emerge.png
Beoremote-One.png Beoremote-One.png
Beoplay-M5.png Beoplay-M5.png
Beoplay-M3.png Beoplay-M3.png
Beoplay-Earset.png Beoplay-Earset.png
Beoplay-Beosound1.png Beoplay-Beosound1.png
Beoplay-A1.png Beoplay-A1.png
Hiort
Hiort
Gold
3593 posts
Posted October 11, 2020 at 11:20 GMT
#2144832

Hiort wrote:

Started to think why it cannot swing out 90 degrees with motor.

If I push the TV manually, after it swinged out max using the motor, I can move it up to 90 but there is an unpleasant "klick" noice from the motor (I assume). It can then be swinged back to the seated position using the motor.

Anyone knows? 

Anyone?

Location: Sweden

My B&O Icons:

Beovision-11.png Beovision-11.png
Beosound-Emerge.png Beosound-Emerge.png
Beoremote-One.png Beoremote-One.png
Beoplay-M5.png Beoplay-M5.png
Beoplay-M3.png Beoplay-M3.png
Beoplay-Earset.png Beoplay-Earset.png
Beoplay-Beosound1.png Beoplay-Beosound1.png
Beoplay-A1.png Beoplay-A1.png
P(
PaulGiles (archived2)
Bronze
231 posts
Posted October 13, 2020 at 22:39 GMT
#2144833
My 11-46 swings out to the full 90 degrees with ease.

Hiort
Hiort
Gold
3593 posts
Posted October 14, 2020 at 07:53 GMT
#2144834

PaulGiles wrote:
My 11-46 swings out to the full 90 degrees with ease.

I wonder if my motor of some reason is set to a max angle.... I cannot find anything in installation manuals to that effect.

Location: Sweden

My B&O Icons:

Beovision-11.png Beovision-11.png
Beosound-Emerge.png Beosound-Emerge.png
Beoremote-One.png Beoremote-One.png
Beoplay-M5.png Beoplay-M5.png
Beoplay-M3.png Beoplay-M3.png
Beoplay-Earset.png Beoplay-Earset.png
Beoplay-Beosound1.png Beoplay-Beosound1.png
Beoplay-A1.png Beoplay-A1.png
or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold