Thank you to our Sponsors
Hi there
I have a beovision 10-46 in my living room on option 6 and a bs 9000 option 0 and a beovision 10-32 option 2 in the dinning room.
connection works fine but if i select a audio feed after warching tv the radio comes on but the tv is still showen. To switch of the picture i have first to switch off the tv an then switch it in radio on again.
any sugestions ?
regards
Why the option 6 in the livingroom tv together wth the 9000?
Why not option 2? - and option 6 for the 10-32 (I suppose they are close together and might both be reached with the Beo4 otherweise)?
MM
Location: Flensborg————Danmark
That's correct, dear Millemissen. But if I understood it right, BS 9000 and BV 10-32 are located together in ONE room (dinning room). In this case the option settings are correct.GreetingsRäuberWhy the option 6 in the livingroom tv together wth the 9000? Why not option 2? - and option 6 for the 10-32 (I suppose they are close together and might both be reached with the Beo4 otherweise)? MM
This sounds like the reverse of my BV11 problem.
Sometimes when I switch from radio to TV the radio still picture (even if previously picture muted) comes on with the TV channel sound. I have to turn the TV off and wait a couple of minutes and then start again. In my case I think it's some sort of software issue combined with a locking-up of the internal tuner module.
My problem only happens when the audio is coming first from the internal TV 'Freeview' tuner.... my Beocenter etc Is all now in a separate room and not connected to the BV11 which will not work with Masterlink.
Graham
"That's correct, dear Millemissen. But if I understood it right, BS 9000 and BV 10-32 are located together in ONE room (dinning room). In this case the option settings are correct."
Dear Raueber,
well, I did understand that the audio system 'is located' with the BV10-46 - most people would do so! - and that the 10-32 is a link-tv
Untill it is clear what Georgy wants, we don't come any further.
Greetings Millemissen
Location: Flensborg————Danmark
Correct. Gregory has to make us clear what is located in the livingroom and in the diningroom. And is the equipment connected via ML?That would make it a lot easier to tell Gregory how he can set the options and he has to make us clear what he wants. I think it is better to wait for a reaction, before we know how he has setup his audio and video. Perhaps forget my solution till sofar.Untill it is clear what Georgy wants, we don't come any further.
Hi
wow i must say a lot response :)
ok it seams that i have to lay out my whole setup.
In the dinnig room ( kitchen )
one beosound 9000 in option 0 as audio master
one beovision 10-32 as videomaster option 2 with beolab 4000 conectedn
as an extra listen zone beolink aktiv with pair of beolab 8000 in option 4
one beo4 as remote for this room
in the living room one beovision 10-46 with 1 beolab 1 2 beolab 6000 and 2 beolab4 in option 6
Bedroom one beovision 10-40 with beolab 1 in option 6
bathroom one beolink passiv in option 6
all with beo4 and masterlinkgateway
the audio master is playing well everywhere even in the livingroom
only thing is that the picture on the tv stays on when i switch to audio and istnt switching the display to black and after a while off
the 2 other beovision 10 are behaving as they should
regards
You must be logged in as a BeoWorld member to post replies to forum threads.
Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.
Become a Member