Hello Gregory,

I have been told with build 126 the ugly grey clock when starting the HD-module was replaced by a B&O-logo and now the electronic curtain works fine with the HD-module.

Can you confirm this?

Regards

Räuber

I wana´ know too🙂

Guys,

I can confirm that my B & O tech said the clock as been replaced by a small B & O logo on the right.

I can't confirm it from my experience because we are still working on how to get my DVB-HD module back to life.

Since a PUC update I lost my DVB-HD, it's n/a in the service menu for no reason.

The last information from B & O (total reset - stick USB in for 4 minutes - unplug without standby - restart) didn't work.

Like you, I whant to know !

Cheers,

Gregory

Raeuber wrote:

Can you confirm this?

Confirmed!!, BS3 controlled tv´s will also have this feature in the next build!

They have however removed the dvb-hd build from the webside due to some failures of different kind.

After updating, choosing radio by pressing red button, and then standby would result in the tv needing to be reset!!! 

BeoGreg wrote:

I now can choose a BV10-32 in the hardware material.

That can be interesting for some of you.

It is! Can anyone add anything to this?

Ehlerz wrote:

Raeuber wrote:

Can you confirm this?

 

Confirmed!!, BS3 controlled tv´s will also have this feature in the next build!

They have however removed the dvb-hd build from the webside due to some failures of different kind.

After updating, choosing radio by pressing red button, and then standby would result in the tv needing to be reset!!! 

 

 

Hi Ehlerz,

I know the bug with the radio of the HD-module. But download of the update 0.1.4.7 is still possible, I proofed it.

It was mentioned the 0.1.4.7 should solve a problem with recordings from the module to HDR1/2. But timer records don´t work with my BV10-40 and HDR2 if the analogue tuner is deactivated, only if it is activated it works fine (then it uses DTV as source of timer instead of wrong V.AUX). I think this is also a bug of the HD-module-software 0.1.4.7 and not of the firmware of BV10.

B&O brings out any size of BV10. Why not solve the problems with the software of the HD-module and the firmware of BV10?? The dealers will not have much fun if they have to update all sold BV10 monthly!

Regards

Räuber

BeoGreg wrote:

the latest software update (build 126) wich do a great job for the "clouding issue"

Sounds great! Curious to know how it has improved the clouding - has it been eliminated? Reduced?

Have others with the newer software noticed an improvement?

How might software fix such a problem?

Stuart

Hi Stuart,

I have actually build 109e (26/04/2010) and the clouding was reduced, but not totally eliminated.

I don´t know how software can fix such a problem, but it works!

/Räuber

The BV10-32 will take the place of the BeoVision/Center 6 series for link rooms. To be able to offer a competitive price advantage on the 10-40, B&O could offer a less classy cabinet...😐

Roger