Beovision 10 11 14
My BV10-40 has all connections at the bottom
Ferdinand
I would bet that it does: The power cord goes into the same "hollow cable rail" as the other connections, so if you can find its entry point, you know where the plastic cover panel to that cable rail is. Not sure how a hotel would go about making the cover non-removable, but screws come to mind. The regular BV10 should have 3 magnets on the top edge of the cover and 2 or 3 rubber-on-plastic inserts (like speaker grilles often do) about a cm from the bottom of the cover and a few cm in from the ends. Once you examine and access the TV that can be moved, you'll probably be able to pop the panel off the fixed-mount as well, because it takes very little horizontal movement to release the inserts, and probably the wall mount is deeper than that. Hmm... should we look up the replacement part price so you can pay the hotel for cracked plastic bits?
Lol. I’m not referring to the connection panel below the screen. I’m talking about the quick access one at the top That is sometimes here This is the bedroom one. I was just wondering about the one in the other room that is fixed so I can’t see which model it is. I very much like the picture quality.
It sure hasThanks everyone. Worked it out. The label was under the speaker cover. It’s a BV11-40 The 11 has the better sound I think than the 10.
Location: Sweden
My B&O Icons:
Yes it does.Thanks everyone. Worked it out. The label was under the speaker cover. It’s a BV11-40 The 11 has the better sound I think than the 10.
Please Log In to Reply
You must be logged in as a BeoWorld member to post replies to forum threads.
Join BeoWorld
Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.
Become a Member