You need to set to options on each device.

I am guessing you have no external speaker.

You should set the TV to Option 2 and the Ouverture to Option 0.

Put everything into stanby.

On the Beo4, press the red dot and menu at the same time.

Then with the list button go to option setting and say Go.

Go to V.OPTION and type 2.    A LED on the TV should blink.

Repeat but this operation but this time for A.OPTION and type 0.

A led on the ouverture should blink.

If it still does not work, turn the power off and back on after a minute, as there is a reconfiguration process on the ML.

p.

Thanks for the quick response, but could you break it down abit more?

How do i change the tv to option 2 and the Overture to option 0?

Do you mean red dot and list together?

Thanks

Make sure that both are in STBY 

Yes, the red dot and LIST at the same time.

Then LIST until the display reads Options? Press GO

Then LIST until the display reads V Opt Press 2

Then LIST until the display reads A Opt Press 0

Then press TV or CD as required. If you press CD then the CD should start and the sound will come from the Avant speakers.

Hope that helps!

Its working!!

Thankyou very much!!

do you of any other options i need to know?

Many thanks

james