BeoSound Moment not starting

14 replies

Hello

Since this morning my BS Moment does not start: The screen stays black and the touchscreen and volume wheel have no function. I have made a reset with the pin on the jukebox - no difference, also a reset of the base has no effect. The LED on the base are steady green (switch) and also steady white for LAN.

Any proposals?

Thank you

Ruedi

My B&O Icons:

Beoremote-Beo4.png Beoremote-Beo4.png
Beovision-Contour.png Beovision-Contour.png
Beovision-10.png Beovision-10.png
Beotime.png Beotime.png
Beosound-A5.png Beosound-A5.png
Beosound-5.png Beosound-5.png
Beoplay-H8i.png Beoplay-H8i.png
Can you use the moment through the app, hence is the soundhart still working? Try to drain battery of the jukebox completely and see if this helps reboot it.

My jukebox was not working out of the blue, completely died. Soundhart was still working. The motherboard of the jukebox needed to be changed. Now my Moment is back again because after replacement of the board my sceen was not working as it used to be, very sensitive for pressure on the back and gave bleeding lcd.

Thank you for the speedy reply!

I can see the BSMoment on the app, but it does not start playing. Also on the BV11 I can see it , no function.

I will run down the power on the jukebox and try again. News to follow later.

My B&O Icons:

Beoremote-Beo4.png Beoremote-Beo4.png
Beovision-Contour.png Beovision-Contour.png
Beovision-10.png Beovision-10.png
Beotime.png Beotime.png
Beosound-A5.png Beosound-A5.png
Beosound-5.png Beosound-5.png
Beoplay-H8i.png Beoplay-H8i.png

UPDATE

The Moment soundhart is playing through BV11 or Beoplay M5 when I use the App. I think, the trouble is in the jukebox. I wait 2 days and start charging it again.

 

My B&O Icons:

Beoremote-Beo4.png Beoremote-Beo4.png
Beovision-Contour.png Beovision-Contour.png
Beovision-10.png Beovision-10.png
Beotime.png Beotime.png
Beosound-A5.png Beosound-A5.png
Beosound-5.png Beosound-5.png
Beoplay-H8i.png Beoplay-H8i.png

There is MUSIC - with the help from Fansastic!

After 24 hours of drain, put the jukbox back in place and it works again!! The only snag is, that I lost all my settings. Still trying to connect the BS M to the Beopla M5 trough the LAN cable setup. WLAN works.

Than you Fansastic and all who shared my problem.

Ruedi

My B&O Icons:

Beoremote-Beo4.png Beoremote-Beo4.png
Beovision-Contour.png Beovision-Contour.png
Beovision-10.png Beovision-10.png
Beotime.png Beotime.png
Beosound-A5.png Beosound-A5.png
Beosound-5.png Beosound-5.png
Beoplay-H8i.png Beoplay-H8i.png
Good to hear and glad this worked for you. For me the Moment works best with wired connection. It sees al other devices through Network Link

Hi

Both, BSmoment and the BeoplayM5 are cable connected to the same LAN. The problem is, that I can not see the speaker on the BS when in service menue. This makes the M5 to be started,every time I turn on BSm, by hand.

I dont know if there is a automatic connection possible to the M5. Would be convinient!

Cheerio

Ruedi

My B&O Icons:

Beoremote-Beo4.png Beoremote-Beo4.png
Beovision-Contour.png Beovision-Contour.png
Beovision-10.png Beovision-10.png
Beotime.png Beotime.png
Beosound-A5.png Beosound-A5.png
Beosound-5.png Beosound-5.png
Beoplay-H8i.png Beoplay-H8i.png

Wild Ruedi wrote:

Both, BSmoment and the BeoplayM5 are cable connected to the same LAN. The problem is, that I can not see the speaker on the BS when in service menue. This makes the M5 to be started,every time I turn on BSm, by hand.

I dont know if there is a automatic connection possible to the M5. Would be convinient!

Hi Ruedi,

When you say "I can not see the speaker on the BS when in service menu", what do you mean?

You will not be able to control the M5 from the Moment. The only way is to control it from the app. If you start a source on M5, you can join that experience by selecting from the Moment screen under the "tab" link (that only appear when something is played from a NL device in the network).  You can also use the BROne and select "join" in the "LIST" menu.

Location: Sweden

My B&O Icons:

Beovision-11.png Beovision-11.png
Beosound-Emerge.png Beosound-Emerge.png
Beoremote-One.png Beoremote-One.png
Beoplay-M5.png Beoplay-M5.png
Beoplay-M3.png Beoplay-M3.png
Beoplay-Earset.png Beoplay-Earset.png
Beoplay-Beosound1.png Beoplay-Beosound1.png
Beoplay-A1.png Beoplay-A1.png

Hello Hiort

What I ment is: in the setup menue there is "connect speakers" either wireless or cable. At this point I can not see the M5.

But it is clear to me now, that the M5 is not a speaker in common sense. The M5 has no possibility for remote start, I understand. So I turn on BS Moment and then M5 and it works.

Thank you so much!

My B&O Icons:

Beoremote-Beo4.png Beoremote-Beo4.png
Beovision-Contour.png Beovision-Contour.png
Beovision-10.png Beovision-10.png
Beotime.png Beotime.png
Beosound-A5.png Beosound-A5.png
Beosound-5.png Beosound-5.png
Beoplay-H8i.png Beoplay-H8i.png

Wild Ruedi wrote:

What I ment is: in the setup menue there is "connect speakers" either wireless or cable. At this point I can not see the M5.

The "connect speaker" option only for connecting speakers directly to Moment, either wired or wireless over VISA. As you have realized, M5 is not a speaker in that context.  

Location: Sweden

My B&O Icons:

Beovision-11.png Beovision-11.png
Beosound-Emerge.png Beosound-Emerge.png
Beoremote-One.png Beoremote-One.png
Beoplay-M5.png Beoplay-M5.png
Beoplay-M3.png Beoplay-M3.png
Beoplay-Earset.png Beoplay-Earset.png
Beoplay-Beosound1.png Beoplay-Beosound1.png
Beoplay-A1.png Beoplay-A1.png
or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.