Beosound 9000 MK2 Door Issue

3 replies
B(
beoperson (archived2)
Bronze
58 posts
Posted July 16, 2018 at 20:09 GMT
#2109393

I have Beosound 9000 which stopped reading CD for few month now.
After spinning about 2mm each time unit would go into stand by mode. (tried laser cleaning).
Assuming this is known Laster issue I let unit alone since I barely use it.
Yesterday decided to check it again. I removed it from floor stand, placed it flat on the table and adjusted position screws. When tried to load CD I notice that glass door would stop half way. I had to help it in order to open door fully.

I'm guessing door belt can be adjusted/replaced?
Could this be relevant to CD issue?

Thanks!

MA
Manbearpig
Bronze
1144 posts
Posted July 16, 2018 at 21:43 GMT
#2109394

Unfortunately, there is no belt. Just motor and gear, which comes as one unit. Not sure, whether B&O is still providing these. The unit alone cost above 400 Euros some time ago. Won't be an inexpensive fix, I guess. Again unfortunately, I don't think that the CD issue has got anything to do with it.

Kai

R(
root (archived2)
Bronze
62 posts
Posted July 17, 2018 at 09:20 GMT
#2109395
Door belt needs replacing, spare part is still available from Bang&Olufsen and this most probably will solve the door issue but has nothing to do with the faulty laser which needs replacing as well
or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold