BeoSound 3000 with red & green light not reacting

10 replies
J(
JNielsen (archived2)
Bronze
6 posts
Posted July 28, 2020 at 16:43 GMT
#2141608

Hello BW,

BS 3000 can't start.

Status : glass door can open. CD can load.

Green and Red light are both active on front.

CD & Radio will not start !

Not asking for PIN code in display...

What to do or test ???

SE
Seanie
Bronze
1550 posts
Posted July 28, 2020 at 17:34 GMT
#2141609
Hi there

Will it play music via the buttons?

If it does not respond to the remote perhaps its in the wrong option mode remote and stereo.

Also from memory one LED is for showing on off status and the other is for timer

Long time since I had a 3000 (22 years)

Try pressing radio and see if radio comes up in the display which will indicate that it is on
matador
matador
BronzeModerator
2425 posts
Posted July 28, 2020 at 17:40 GMT
#2141610

Hi,

What Seanie said.
But if the unit don't work from the keyboard, The symptoms you experience are those of a fried unit. I don't know if it is the EEprom or the microcomputer, but its an internal component who tends to fry sometimes. I have one like that and there's some other reports of that on the forum.

As far as i know it's an expensive repair if even still available and without DIY solution.

I hope i'm wrong.

Location: Paris France

BE
beouser19
Gold
60 posts
Posted July 28, 2020 at 17:42 GMT
#2141611

Hi,

allmost shure is a PCB 6 processor failure

J(
JNielsen (archived2)
Bronze
6 posts
Posted July 28, 2020 at 17:44 GMT
#2141612

Yes. It is getting old :D

No musik :-(

CD and Radio is not starting when pressing on the BS 3000.

I can get into the TM with the 0258. Do you think I can reset or do other to make change to active system again ?

The red and green led are both on...

J(
JNielsen (archived2)
Bronze
6 posts
Posted July 28, 2020 at 17:47 GMT
#2141613

Can I see something in one of the TM menu ???

matador
matador
BronzeModerator
2425 posts
Posted July 28, 2020 at 18:48 GMT
#2141614

Browsing the TM you should see something like IC error or something, can't remember well. But something you could understand as microprocessor or EEprom error. Then nothing you can do appart from using it for parts, I'm afraid.

 

Location: Paris France

J(
JNielsen (archived2)
Bronze
6 posts
Posted July 29, 2020 at 10:27 GMT
#2141615

I looked at this : 

matador
matador
BronzeModerator
2425 posts
Posted July 29, 2020 at 12:03 GMT
#2141616

JNielsen wrote:
1 IOP 19

IOP: Last error in the I/O microprocessor =  19: TP module HW error APOS

Can't help much more but it seems to be an hardware error. Don't know what TP and APOS are.

Location: Paris France

J(
JNielsen (archived2)
Bronze
6 posts
Posted July 30, 2020 at 11:02 GMT
#2141617

I fixed a broken rubber elastic for the LOAD of CD. It works again to load the CD.

Can that be the hardware problem that need to be reset ? 

or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold