Beosound 1 - deactivating the Lamp
Location: Brittany - France
My B&O Icons:
Unfortunatly not.
That is the same with almost all the speakers that B&O insist to have a lamp glowing.
Should be a simple thing to introduce a "night mood".
Email B&O and let them know.
Location: Sweden
My B&O Icons:
Is it possible to disconnect the lamp?Unfortunatly not. That is the same with almost all the speakers that B&O insist to have a lamp glowing. Should be a simple thing to introduce a "night mood". Email B&O and let them know.
On the Beolab 20, Beolab 18 etc the light goes out after a few seconds and only lights up as it turns on or off or is in safe mode. The older models these replaced however always had a light. On a side note. When Apple introduced iMac G5, the first flat iMac (without a globe foot) they got complaints from students because their dorm rooms would be to light with the iMacs sleep pulsating light indicator. Apple responded by a firmware fix that allows the illumination to shine less bright when the room light level is less than in daytime, using the light sensor primarily used (and only for, before) the monitor. 🙂Unfortunatly not. That is the same with almost all the speakers that B&O insist to have a lamp glowing. Should be a simple thing to introduce a "night mood". Email B&O and let them know.
Unfortunatly not.
That is the same with almost all the speakers that B&O insist to have a lamp glowing.
Should be a simple thing to introduce a "night mood".
Email B&O and let them know.
Is it possible to disconnect the lamp?
It is not possible
Location: Sweden
My B&O Icons:
Should be very simple indeed as they already control the color and the intensityShould be a simple thing to introduce a "night mood".
Location: Brittany - France
My B&O Icons:
Please Log In to Reply
You must be logged in as a BeoWorld member to post replies to forum threads.
Join BeoWorld
Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.
Become a Member