Beomaster 900K

3 replies
T(
TopGun (archived2)
Bronze
2 posts
Posted March 7, 2018 at 20:53 GMT
#2102895

Hi there i recently acquired a Beomaster 900k, this is my first B&O and so far i love it.

But here comes the question, i tried to take it apart yesterday, but couldn’t ...or was afraid of breaking something if i would force it. What am i missing ? There are six screws that seems to hold the radio in its cabinet.... what else?

R(
root (archived2)
Bronze
62 posts
Posted March 7, 2018 at 22:20 GMT
#2102896
I think you need to remove the feet at the bottom since they hold the chassis in place.

Not sure though if the woofers need to be removed as well, they are accessible by removing the front grilles which are held in place by some sticky tape.

But I'd start with the screws at the bottom and the rest should be easy (unless there's a hum from the mains supply;)
DI
Dillen
BronzeModeratorFounder
12777 posts
Posted March 8, 2018 at 06:27 GMT
#2102897

Not the feet.
Not the woofers.
There are either two or four large screws at the bottom.

Versions with the offset front (dial and speaker frames not flush with the front face of the wooden cabinet) also needs the
four round knobs taken off.

Then push the chassis out the back.
Apprx 10 cm out take off the internal plug for the speaker leads before you go further.

Martin

or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold