Beomaster 5 problems

7 replies
Hi
I have a BM5 that does not work.
There is nothing on the screen. The unit  BM5 turn on,disc spinning, fan working, but only 3 of 4 test led's are showing voltage .
+5v-ATX- ok,  +3,3V-ATX - ok,  +12V- Blank -ok, +5V_SB - NOT OK.
Only the red light on the BS5 screen lights up. It does not blink, it's only light.
I tested a screen on another BM5 running and the screen works normally.
I also changed the disc from one BM5 to another and the disk is working normally.

Is the power supply problem or on the motherboard?
Is it possible to repair by replacing the condensers?

Thanks for the advice.

 

The leds are there to give a status about the PSU. So, in this case the 5SB powerline is dead.

I suspect more than just a capacitor.

Location: Utrecht

Quite a challenge to achieve "Less is More" while having the Beovirus.

Hi

do you think motherboard is broken ?

 

Nope, the powerboard underneath the diskdrive.

Location: Utrecht

Quite a challenge to achieve "Less is More" while having the Beovirus.

Thanks

will try to change with other one to check :)

Hope it can be fix.

 

 

Beobuddy

so ..after that, do can conclude that the failure in on 5V stand by section on power supply PCB?
Have you ever repaired that error ?

 

 

update..

Led smd had bad solder that is why not working.

After all chenges at the end,  problem is on motherboard.

let's go on :)

 

or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.