matador43 wrote:

Hi again,

Hi was gifted with a beolink 5000, perfect to cancel a timer on my haunted BS2300. Unfortunately, as usual, the screen is not well and the user guide (I have in genuine paper, do you believe that?) don't mention how to cancel timers.

Is there an easy key sequence i can press in the blind which will delete all timers on the Beosound?If so could someone tell it to me ?

It's sad to have that perfect condition remote useless because of that screen but on what I read here an here, it's not an easy fix…

Yes, absolutely.

I bought it with the timer programmed to wake up the system everyday at 12h30.
Aten searching and with the help from the forum I understood that the Beocenter 2300 can be timer programmed with a BL5000 or BL7000 even if it can't from the device itself.

Just tested with my 2-way 2300 and BL5000

Try this with the system at standby and the remote quite close to the sensor at the bottom.  Pause a couple of seconds between each press:

PROG

DOWN

PLAY

STATUS

CLEAR

Come back to me if it doesn't work and I'll have another look.

EDIT:  I think that you may have to repeat several times if there is more than one timer set.

Hi Guy,

Thats exactly what I was expecting for, Thank you.

Right now the timer awakes the system everyday minus Saturday.
How many timers do you think it is ?

I'll try right now and will do it 7 times to be sure, but I'll know if it succeed only tomorrow at noon !

Also, do the system respond by any means?

Thank you again.

matador43 wrote:

Yes, absolutely.

I bought it with the timer programmed to wake up the system everyday at 12h30.
Aten searching and with the help from the forum I understood that the Beocenter 2300 can be timer programmed with a BL5000 or BL7000 even if it can't from the device itself.

matador43 wrote:

Right now the timer awakes the system everyday minus Saturday.
How many timers do you think it is ?

I'll try right now and will do it 7 times to be sure, but I'll know if it succeed only tomorrow at noon !

Also, do the system respond by any means?

Could be just one timer with the specific days chosen.

Not sure if the system responds .... sorry

No problem. Thank you for your help. 

It's done, now lets wait until today! 😜

It didn't work, the system turned itself on at 12h30 🙁

Guy, as i repeated the sequence several times may I have inadvertently turn it off and back on with the same sequence ?

Thanks for your help.

I'll go and have another play with mine.  I will set a few timers and see if there is any difference when cancelling, and if there is any feedback from the lights on the unit.

One other thing:  How can you be sure that the BL5000 is set up for two-way mode for audio? (Which it would need to be for setting or cancelling timers)  (I will have a play and give you the button presses for setting this also.)

Give me a mo ...