Beolab 90 and Beo remote 1

27 replies
N(
Nodarkatz13844 (archived2)
Bronze
21 posts
Posted October 20, 2019 at 14:41 GMT
#2128975

I want to control Beolab 90 with beo1 remote. IR is connected to master speaker. On remote I have done everything what is required in technical guidance for Beolab 90: setting, advanced, product, Beosound, renamed to Beolab 90. Still no response from Beo 1. Does anyone can help me? Thanks 

RA
Razlaw
Bronze
4757 posts
Posted October 20, 2019 at 17:24 GMT
#2128976
There are different or eyes. When I first connected an ir to my 50s it did not work. Maybe check if you have the right ir eye?
N(
Nodarkatz13844 (archived2)
Bronze
21 posts
Posted October 20, 2019 at 22:05 GMT
#2128977

I bought the right IR from my dealer.

I followed all his instructions but Beo 1 remote doesn’t control Beolab 90. 
 Any other suggestions? I read in technical guide for beolab 90 that speakers must be paired with Beosound. How?

RA
Razlaw
Bronze
4757 posts
Posted October 20, 2019 at 23:18 GMT
#2128978
I think you can ignore the pairing. I wondered about that myself when I set up my 50s. I am not sure what else to suggest.

You are selecting Beolab 90 with the BR1 so it is the active mode before using? And I suppose it is possible dealer gave you the wrong ir eye? It should be the plain one with no lettering on the buttons.

Here is an old thread on the subject.

/forum/general-discussion-and-questions/control-of-beolab-50-using-the-beoremote-1-how-to-pair
N(
Nodarkatz13844 (archived2)
Bronze
21 posts
Posted October 20, 2019 at 23:38 GMT
#2128979

The I got from the dealer is the right 

N(
Nodarkatz13844 (archived2)
Bronze
21 posts
Posted October 20, 2019 at 23:45 GMT
#2128980

I got from the dealer the correct IR. Something I am doing wrong but can not figure it out

RA
Razlaw
Bronze
4757 posts
Posted October 21, 2019 at 00:22 GMT
#2128981
Hopefully somebody here with more knowledge than me will be able to help. I am trying to remember, I might have had to connect the ir eye, unplug the 50s, and then plug in again to get them to recognize that the eye was connected.
N(
Nodarkatz13844 (archived2)
Bronze
21 posts
Posted October 21, 2019 at 00:58 GMT
#2128982

I thought about it but never did it . When I am home I will try and let you know. Thank you very much for your help 

N(
Nodarkatz13844 (archived2)
Bronze
21 posts
Posted October 21, 2019 at 04:28 GMT
#2128983

I tried to unplug and plug back but Beo 1 is still not working with speakers.

N(
Nodarkatz13844 (archived2)
Bronze
21 posts
Posted October 21, 2019 at 04:29 GMT
#2128984

I tried to unplug and plug back but Beo 1 is still not working with speakers.

or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold