Thank you to our Sponsors
Hey guys!
I need some advice on audio system config.
I have B&O Beolab 8000 (with RCA) + Denon PMA-600NE (presumably doesn't work with active speakers, lol).
All I wanna is to hear magnificient sound through my Beo 8k, with signal coming from vinyl player like Audio technica AT LP120XUSBBK (also RCA) and occasionally from my PS4 (it has Toslink).
What should I get to commutate this all in one almighty sound system? :)
You can do the following -
1. Connect Audio Out (Recorder) from Denon to Beolab 8000. - RCA
2. Connect Audio Technica Audio Out to Denon Audio In. - RCA
3. Connect PS4 Toslink to Digital in on Denon. - Toslink
Just need the right cables. Reach out to Steve at Sounds Heavenly for good quality cables.
My B&O Icons:
Already tried 1 and 3.
Turns out that in that case I can't control the signal on Denon.
No volume control, no L/R balance, no Equalizer =\
Hi vedmich,
Welcome to Beoworld. If you have no volume control then you may be using the wrong output sockets on the receiver. The pre-out sockets should be adjustable via the receiver remote.
Please feel free to click on my sponsor link below if you need any help with the cables to get everything working.
Kind regards, Steve.
Location: The cable workshop, England
My B&O Icons:
Thanks Steve!
Denon actually has Speakers Clemmas on OUT.
Should I try and cut the one side of RSA to commutate it via those clemmas?
You must be logged in as a BeoWorld member to post replies to forum threads.
Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.
Become a Member