Beolab 50 won't install

3 replies

I have a pair of Beolab 50's connected through RCA to my Marantz SR8012 amplifier.

It worked well untill I wanted to do a mic calibration. The speakers stopped responding after I put the mic in.

Ok, so I pulled out the mic but now I cannot get the speakers to work anymore. They do not play music and the app cannot find them either. Not even after 2 factory resets.

Since I cannot find a proper setup manual I am wondering if you could help?

This is what I have as a setup:

- Connected the Master to the slave with a network cable. Powerlink in master, network on slave

- RCA in on the Master speaker as Front Left and Front right speaker

- No cabled network connection to my home network, I use WiFi

Please help me with a proper Factory Reset and config setup and sequence.

Many thanks, much appreciated

Peter

Peter Dorr wrote:

Since I cannot find a proper setup manual I am wondering if you could help?

- Connected the Master to the slave with a network cable. Powerlink in master, network on slave

Is this the guide, you are looking for - seems to be quite ‘proper’.

Location: Flensborg————Danmark

Pffff it works again.

I have connected the two speakers with a network cable not using the Powerlink connector, just the network connector.

I have done a factory reset 3 times and finally it worked again.

No idea what solved it but it took me the best part of an afternoon to solve everything

Happy that it works again.

 

or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.