The sound from my Beolab 2 is very quiet. Even when played at full volume I can just about hear it.
When I increase the volume or change the cd track there is a brief buzzing sound or sounds.
When the system is standby the light on the BL 2 is red. When the system is active the light turns to green which I believe is normal.
This is the configuration I am using.
BL speakers both connected to the out sockets on the BL 2.
Setup selection is free & selection 2.
The last PL lead is connected to one of the PL sockets on the BS3200.
I have:-
Beolab 8000 mark1 speakers.
Beo4 remote control.
Beosound 3200 HDD system.
I have recently bought mk2 powerlink cables. I have tried other PL cables without success.
I have tried pushing in the cables in case of loose connection.
I would very much appreciate any ideas. Thanks.