I am inexperienced with B&O and electronics. I was just given this turntable (beogram RX-2) tried to connect the turntable to my Onkyo TX-SR 607 receiver but connected it through the aux connection in the front of my receiver (the red, yellow, white connection). The turntable has only a white and gray plug connection coming from the rear of the unit and this is confusing. Remember I am ignorrant at this stuff. Now to my questions. The turntable played but the music volume level was very low and so I had to turn the volume up very high to appreciate the music (not good) plus the music was not rich as I expected it to be. Why is this happening and please help if you understand my rambling on. Thank you for your time. Brian
Thank you to our Sponsors
beogram RX-2
3 replies
You will have to connect to your 607 with a preamplifier, the RX2 does not have one, and I dont think the 607 has one either, check for phono input on the backside
Location: Mexico city
Retired
Printing machine technician
Restored various 1960-70 items
Rock and Roll music
Collecting Vinyl
Restored Jukebox Wurlitzer 1050
Just as thought, the 607 has no phono input, so you will need a preamp
So you will need something like this, (search for Phono preamp)
And connect like this
Location: Mexico city
Retired
Printing machine technician
Restored various 1960-70 items
Rock and Roll music
Collecting Vinyl
Restored Jukebox Wurlitzer 1050
Please Log In to Reply
You must be logged in as a BeoWorld member to post replies to forum threads.
or
Join BeoWorld
Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.
Become a Member