Thank you to our Sponsors
i wonder if you can help. i have just bought a beogram 3300 and noticed that there only seems to be 5 prongs in the din plug but it looks like there are 2 missing. I have plugged it into my Beosystem 2500 (attached to BeoLab 4500 speakers ) and there is no sound coming out. Can you advise me if i need a separate pre amp as I don't understand whats going on. Really appreciate your help.
Andy
You will need a seperate preamp. The two missing prongs are for datalink remote control. You may well need these but I couldnt tell you if the deck will operate via remote with a 2500 ststem. I am sure someone will come on that does know the answer to that part of your question.
As you will be operating with a separate pre amp you will probably not need pins 6 and 7 anyway as your cables are unlikely to support datalink.
The Beogram 3300 and the Beocenter 2500 are both datalink compatible but you will need the correct cables.
You must be logged in as a BeoWorld member to post replies to forum threads.
Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.
Become a Member