BeoCom6000 and Beotalk1200

7 replies
K(
Offline
KarstenOtte (archived)
Bronze
Posted August 25, 2008 at 16:19 GMT
#1852804

Hi,

I am using BeoCom6000 (PSTN) connected to an internet router (FritzBox) which is plugged via a splitter into the telephone box. I am using an analog broadband telephone extension. In Germany called 'Analog DSL'.

Since I need an answering machine I would like to prefer an answering machine from B&O such as BeoTalk 1200. But even after reading the technical publication from B&O on the website, their latest Product Catalogues and the User's Manual about BT1200 I still don't know whether the combination of BeoCom6000 (PSTN) and BeoTalk1200 connected to an analog telephone mainline would work.
I think it cannot work since an analog telephone extension only supports one line entry.... But based on B&O all combinations seem to be possible and such a stupid problem as described from my side does not exist...

In the B&O shop they made an offer to me for a new telephone complex... But this offer was very expensive and I see no need to exchange the BeoTalk 6000 since it is working fine. Also I don't want to change to ISDN just because of an answering machine...
Thus, I am still in hope that these three components could work together...Is there anyone who could enlighten my technical understanding outside the 'B&O Catalogue language'?

Many Thanks in Advance, Jana Otte

 

Peter
Offline
Peter
Gold
Posted August 25, 2008 at 17:26 GMT
#1852805
I use a system with 3 Beocom 6000s,a Beocom 2, a Beotalk 1200 and an internet router all attached to one line. As long as you have filters attached, it seems to work OK. Having said that, I think the Beotalk 1200 is not B&O's finest hour - one of the few products for which you need the manual - repeatedly!

My B&O Icons:

BeoCenter-9500.png BeoCenter-9500.png
Beoremote-Beo4.png Beoremote-Beo4.png
Beovox.png Beovox.png
Beovision-11.png Beovision-11.png
Beotime.png Beotime.png
Beosound-Stage.png Beosound-Stage.png
Beosound-Moment.png Beosound-Moment.png
Beosound-5.png Beosound-5.png
Beosound-2.png Beosound-2.png
Beoremote-One.png Beoremote-One.png
Beoplay-Portal.png Beoplay-Portal.png
Beoplay-Earset.png Beoplay-Earset.png
Beomaster.png Beomaster.png
Beolit.png Beolit.png
Beogram-400x.png Beogram-400x.png
Beocenter-2.png Beocenter-2.png
K(
Offline
KarstenOtte (archived)
Bronze
Posted August 26, 2008 at 03:03 GMT
#1852806

Many thanks for you fast answer, I see a light at the end of the pipe.. - but for first, two new questions back...
What do you mean with 'filters'? Is this something I can get together with BeoTalk1200 at B&O? (I suppose a very stupid question... )

Also - I still haven't bought BeoTalk1200 yet. Maybe it would be better to take the previous version, BeoTalk1100?? I only want to record/leave messages with acceptable sound quality - that's all. Thus, I would not need any extra functions probably supported by BeoTalk1200. Do you have an idea whether BeoTalk1100 is easier to handle than the latest version? Thanks again, Jana

 

Peter
Offline
Peter
Gold
Posted August 26, 2008 at 15:09 GMT
#1852807
No! The BT1100 is just as bad! You cannot get these new. By filter, I mean an ADSL filter which allows broadband and telephone line to work together. Any electrical store sells them.

My B&O Icons:

BeoCenter-9500.png BeoCenter-9500.png
Beoremote-Beo4.png Beoremote-Beo4.png
Beovox.png Beovox.png
Beovision-11.png Beovision-11.png
Beotime.png Beotime.png
Beosound-Stage.png Beosound-Stage.png
Beosound-Moment.png Beosound-Moment.png
Beosound-5.png Beosound-5.png
Beosound-2.png Beosound-2.png
Beoremote-One.png Beoremote-One.png
Beoplay-Portal.png Beoplay-Portal.png
Beoplay-Earset.png Beoplay-Earset.png
Beomaster.png Beomaster.png
Beolit.png Beolit.png
Beogram-400x.png Beogram-400x.png
Beocenter-2.png Beocenter-2.png
B(
Offline
britops (archived)
Bronze
Posted August 26, 2008 at 15:30 GMT
#1852808
I love my BeoTalk 1200. Its the best answer-machine on the market. However its true you have to use the manual regularly.
J(
Offline
jandyt (archived)
Bronze
Posted August 26, 2008 at 17:45 GMT
#1852809
Totally agree with you Richard. Love mine too.
K(
Offline
KarstenOtte (archived)
Bronze
Posted August 27, 2008 at 02:53 GMT
#1852810
Hi Peter, thanks for your answer - now I fully understand the filter item! 
Answering maschine: well maybe I have to evaluate it again, but my last one was from Siemens, it worked more than 10 years very fine, but till the last day the manual was required to simply enter date and time anew....so, I am just in that hope B&O cannot be this bad (they have the big advantage of not being Germans:-); bye, Jana (from Germany of course..)
or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold