Beocom 6000 not registered

6 replies
D(
Offline
david707 (archived)
Bronze
Posted May 30, 2008 at 07:24 GMT
#1845211

Tried to register a handset to my 6000 base (Mk1). I get "searching for base" and then "not registered"

This handset was previously registered to the base but having removed the battery for a while and then re-connected it displayed "No signal". The forum advice was to remove the base from the handset's memory and register it again. The base is open so why doesn't the handset find it and register?

Thanks for further help

David

J(
Offline
jandyt (archived)
Bronze
Posted May 30, 2008 at 09:11 GMT
#1845212
D(
Offline
demonell (archived)
Bronze
Posted May 31, 2008 at 06:39 GMT
#1845213
Obvious perhaps but I assume you've pressed the little button on the pstn to allow the 5mins to re-register the phone?
D(
Offline
david707 (archived)
Bronze
Posted May 31, 2008 at 18:16 GMT
#1845214
Yes - I did 'open up' the base by pressing the button. I have two other handsets working fine with this base and don't want to do anything to prevent them from working. I've never had this problem before so I think the offending handset has a fault which has developed in storage. It was originally dead after been left out in the rain but then came back to life after months of storage in a dry warm environment. It worked fine and then began to discharge batteries faster than normal. Maybe time for another handset or a service kit?
Keith Saunders
Offline
Keith Saunders
BronzeFounder
Posted June 1, 2008 at 04:37 GMT
#1845215

David,

There could be several reasons why your base is not registering including:-

  • Faulty battery which provides enough power to run the phone itself, but is to weak for transmission.
  • You have 5 phones already registered with teh base even if you only actually using two.
  • The phone itself has a fault.

Given that you have said that the phone appears to discharge batteries faster than normal tends to lead me to believe that it is an electronic fault with the phone.

I would suggest updating it to a Mark II (modified) phone as discussed in other threads, PM me for information.

Location: Hampshire, England

D(
Offline
david707 (archived)
Bronze
Posted June 2, 2008 at 09:06 GMT
#1845216

Thank you Keith. I will send you a PM

 

or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold