Beocom 6000 Base Locked

10 replies
J(
james9686 (archived2)
Bronze
6 posts
Posted April 14, 2020 at 15:57 GMT
#2136833

Hello,

I have a Beocom 6000 MK1 which I got from my Dad. I deleted the handset and tried registering it again to the base but it is requesting a PIN code, having found out the hard way this means that the base has reached its maximum of 6 handsets and there is no way to reset the base, it is basically locked.

Unfortunately there are no service centers in Lebanon and I have searched everywhere on how to reset the phone but no luck. This phone has been in my family for the past 20 years and I really want to make it work again.

Is there any way I could reset the base myself without the hassle of sending it? 

 

Guy
Guy
GoldModerator
4528 posts
Posted April 14, 2020 at 16:54 GMT
#2136834

Hi and welcome to Beoworld!

Have you tried the default pin code of 0 0 0 0?

Location: Warwickshire, UK

My B&O Icons:

BeoCenter-9500.png BeoCenter-9500.png
Beoremote-Beo4.png Beoremote-Beo4.png
Beovision-10.png Beovision-10.png
Beotime.png Beotime.png
Beosound.png Beosound.png
Beosound-Explore.png Beosound-Explore.png
Beosound-Essence.png Beosound-Essence.png
Beoplay-P2.png Beoplay-P2.png
Beoplay-M3.png Beoplay-M3.png
Beoplay-H4.png Beoplay-H4.png
Beoplay-H3.png Beoplay-H3.png
Beoplay-Form-2i.png Beoplay-Form-2i.png
Beoplay-Earset.png Beoplay-Earset.png
Beoplay-A2.png Beoplay-A2.png
R(
rotel1111 (archived2)
Bronze
153 posts
Posted April 14, 2020 at 17:29 GMT
#2136835
Have you removed the handset from the base or just did handset reset?

If handset reset itself, then the handset still exists in the base, occupying space and you can’t add more handsets if you’ve reached 6. Deleting handsets from the base can only be done by: registered handset or B&O technician service tool + special cables.
J(
james9686 (archived2)
Bronze
6 posts
Posted April 14, 2020 at 18:49 GMT
#2136836

Yes, I have tried that the 0000 pin code

J(
james9686 (archived2)
Bronze
6 posts
Posted April 14, 2020 at 18:52 GMT
#2136837

I believe handset reset. So I do not have any options if there are no service centers around?

R(
rotel1111 (archived2)
Bronze
153 posts
Posted April 14, 2020 at 19:38 GMT
#2136838
No, unless you have one of the handsets, which has been registered “inside” ( not the one which has been reset ).
Keith Saunders
Keith Saunders
BronzeFounder
4798 posts
Posted April 14, 2020 at 20:05 GMT
#2136839

There is only two ways to reset the base either via a connected phone or using the B&O service tool and application which connects to the base without a phone.

You are correct that if it asks for a pin code then you have six handsets registered to the base.

Whenever you wish to remove a handset from the base you must unregister it.

I am assuming you do not have other handsets still registered to this base?

 

Location: Hampshire, England

J(
james9686 (archived2)
Bronze
6 posts
Posted April 14, 2020 at 20:12 GMT
#2136840

I'm guessing that the handset itself was reset many times before instead of being unregistered because it is the same handset since the phone system was bought and the only one in the house.

So there aren't any handsets registered before that I can use to reset the base.

R(
rotel1111 (archived2)
Bronze
153 posts
Posted April 15, 2020 at 10:42 GMT
#2136841
The service tool + cables is the only option.
J(
james9686 (archived2)
Bronze
6 posts
Posted April 15, 2020 at 17:22 GMT
#2136842

So I am stuck then :(

or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold