Hello
New member today.
Bought my first B&O setup ever yesterday.
Ended up with a Beocenter 9500 and Beolab Penta Mk1.
Connected the system when i got home yesterday and i love it so far.
Everything not working:
1. CD drive is not working. CD cover works fine and the cd spins up. Then the 9500 goes into standby. I've read on the old forums that this could be because of a bad capacitor. So i've ordered spares for changing this out.
2. Cassette deck is not working. All the rubber belts are rotten. I've ordered new ones.
3. All the foam surronds on the mid range speakers are gone. I've ordered new ones.
4. On of the bass driver on the right penta is blown. It makes distortion and it's also not moving freely, so i guess the voice coil is stuck to the magnet.
5. The fabric on the front panel have seen better days. So should be replaced.
6. Locking mechanism on the amplifier on the left speaker is not working. Ordered a new locking mechanism.
So over to my questions:
1. The system is connected with 5-pin din speaker link. I guess powerlink would be better. Is there anywhere that still sell adapters for this?
2. Will i benefit from re-caping both the 9500 and pentas?
3. Is the bass driver fixable or should i just source a used one? Anywhere to get one in europe? All i can find are from ebay us. I live in Norway, so shipping will be expensive.
Thanks for feedback.