Hi AllI tried to connect my Beolab Penta with my new Avant but no luck? Maybe I did something wrong?Powerlink from Avant (RJ45 to 8pin) into ML/MCL converter. Converter has 2 old pin outputs for the speakers. It didn't work. Any ideas?
My B&O Icons:
Thank you to our Sponsors
Avant 75 + Beolab Penta?
17 replies
You'll need the 'fully wired' PL cable.
(Otherwise the converter won't turn on/trigger on).
Ask your B&O dealer or Steve at SoundsHeavenly for help (and details).
MM
Location: Flensborg————Danmark
My RJ45 to Powerlink cable was from Steve. Maybe not the right spec? There's only one of them on the site with different lengths.You'll need the 'fully wired' PL cable. (Otherwise the converter won't turn on/trigger on). Ask your B&O dealer or Steve at SoundsHeavenly for help (and details). MM There is a tv - and there is a BV.
My B&O Icons:
This - from Steve - should be the right one - (is that the one you have?).
Location: Flensborg————Danmark
Please post some photos of the Pentas next to your Avant once you have everything set. Up. I was thinking of mating my Pentas with an Avant 55. I'd love to see how this looks.🙂
I have put them away in storage while the house is being done. I wish I knew about what MM said earlier. I was going to keep them in the living room for a while until the house gets complete.
My B&O Icons:
Hungedu - from me to you.
🤒
Iv'e got the penta's with my Avant 55'. The display's work to.🌹🤗Sorry for the mess with the sockets on the Wall etc. But right now i live in a rented house...🤑😉Shaun. Login to view image
Thanks for posting the picture!
Nice to see these side by side! Thanks!
Please Log In to Reply
You must be logged in as a BeoWorld member to post replies to forum threads.
or
Join BeoWorld
Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.
Become a Member