Announcing Beo5 3rd Party XML Generator Verison 1.1.0 is now available

26 replies
Keith Saunders
Offline
Keith Saunders
BronzeFounder
Posted February 8, 2009 at 11:15 GMT
#1868789

Jacob (Weebyx) and myself are pleased to announce that the Beo5 3rd Party XML Generator version 1.1.0 is now available for download to silver and gold members link

This version has a pull down to define the version of firmware loaded in the Beo5. It supports the current version 1.40a which is only available with version 2.20 of the Beo5 Configuration Tool and the previous firmware version.

Below is a screen shoot showing the updated area.

Location: Hampshire, England

S(
Offline
spirost (archived)
Bronze
Posted February 8, 2009 at 11:46 GMT
#1868790

Congratulations to both of you. What more can I say than a big BRAVO!!!!!!!

Keep on the good work!

Q(
Offline
Quim43 (archived)
Bronze
Posted February 8, 2009 at 12:35 GMT
#1868791

Thank You very much, Keith and Jacob for the work you both are doing here.

Best regards

B(
Offline
beo4me (archived)
Bronze
Posted February 9, 2009 at 04:49 GMT
#1868792

Hi Keith & Weebyx,

Thanks a lot for all the time you put into this!

Cheers,
Frank

K(
Offline
kokomo (archived)
Bronze
Posted February 9, 2009 at 06:38 GMT
#1868793

Let me say right away, I can't afford the Beosound 5 and am not technically knowledgable enough to understand this thread. However, what I can't understand also is why this work is neccessary when surely B&O should be providing this, especially for such an expensive product!

Now feel free to beat me down!

B(
Offline
beo4me (archived)
Bronze
Posted February 9, 2009 at 07:32 GMT
#1868794

kokomo wrote:

Let me say right away, I can't afford the Beosound 5 and am not technically knowledgable enough to understand this thread. However, what I can't understand also is why this work is neccessary when surely B&O should be providing this, especially for such an expensive product!

Now feel free to beat me down!

In this case Beo5 is the handheld remote controller not BeoSound5 (BS5) 😁

Frank

B(
Offline
beo4me (archived)
Bronze
Posted February 9, 2009 at 07:51 GMT
#1868795

Hi Keith,

I just tested the tool just now and it does also fix the issue with the long pauses that I had previously, so no more manuals edits for these 😐. Bravo!

Frank

K(
Offline
kokomo (archived)
Bronze
Posted February 9, 2009 at 09:03 GMT
#1868796

beo4me wrote:

kokomo wrote:

Let me say right away, I can't afford the Beosound 5 and am not technically knowledgable enough to understand this thread. However, what I can't understand also is why this work is neccessary when surely B&O should be providing this, especially for such an expensive product!

Now feel free to beat me down!

In this case Beo5 is the handheld remote controller not BeoSound5 (BS5) 😁

Frank

 

Thanks Frank, that's one thing I did understand. I meant the Beo5! Same point though!

😕

 

A(
Offline
aaaa (archived)
Bronze
Posted February 12, 2009 at 09:45 GMT
#1868797

Hi!

Can you please give a free link to the new manual like you did with version 1.0?

I would like to read it before I buy.

 

Thanks in advance!

Keith Saunders
Offline
Keith Saunders
BronzeFounder
Posted February 12, 2009 at 09:52 GMT
#1868798

The new help guide with version 1.1.0 is exactly the same as the previous version except it shows a picture as shown on the first posting of this thread where two pull downs have been added to select the firmware being used and the carrier frequency of the infra-red signal to the third party device

Location: Hampshire, England

or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold