Ok, few hours after the order, I received a shipping notice.

Tracking number received…

The One Remote I talk about is the RMB4 module making the Beo4 able to send non BO and Apple IR commands so for the finish, I would say "bakelite green with silver contact points" :-)

I already own the Beo4 and it's a very standard one.

Maybe I should have been more clear, sorry.

matador43 wrote:

Good morning to you all,

I've finally settled in my new home and have time to take care of certains things, one of which is the control of my non BO tv with a Beo4.

After some search and advices on the forum, i found that the OneRemote was the better solution to me.

So I've just placed an order this morning and thought it may be interesting to share the experience step by step from ordering to installing to playing with it!

So Step 1: order placed this morning!

To be continued…

Funny, I ordered one RMB4 yesterday, came today, installed within 30 minutes, and now my Samsung TV works with Beo4 and my Beomaster.

When TV is pressed, Samsung TV is turned on and the BM goes to A.AUX and receives all volume commands :)

Works like a charm, however sometimes my TV(KS8005) needs a few press of TV before turning on, but it seems that if it is off for 10-20 seconds before I press TV again, it turns on every time. So that is ok.

Until now I have used my Beo6 for the same control, and I still will use it on account of more control and customization, and the icons for TV stations, but the rest of the people that uses the TV, hates the Beo6 ;) Now they are happy with the Beo4 :)

/Jacob

oh 

Your post is very warmly welcome here Weebyx as i'm still waiting for delivery and of course my mind is full of "what if" questions !

I hope my setup will work as good as yours. I just have a Mac mini more and dont know how all this will work.

On a side note i would say that my TV is Corean too and it's very slow to start up, leading me to think sometimes that i've not depressed enough the button on the original remote. Maybe it has to do with the issue you're experiencing?

Cant wait to receive mine…

As far as tracking goes, it's still on danish territory!

Regards.

matador43 wrote:

oh 

Your post is very warmly welcome here Weebyx as i'm still waiting for delivery and of course my mind is full of "what if" questions !

I hope my setup will work as good as yours. I just have a Mac mini more and dont know how all this will work.

On a side note i would say that my TV is Corean too and it's very slow to start up, leading me to think sometimes that i've not depressed enough the button on the original remote. Maybe it has to do with the issue you're experiencing?

Cant wait to receive mine…

As far as tracking goes, it's still on danish territory!

Regards.

My TV starts, and has picture in about  a second :)

It has something to do with the timing of the IR codes I guess, but the problem is not there if just left off 10 seconds before turning on. All works perfect.

Just needs a few "getting use to" regarding the buttons, but the included manuals is great. It is easy to use.

I do not have an Apple TV connected to my living room tv as the smart-tv part has it, but my bedroom (2011 Samsung UE466005) has an Apple TV connected, it should be able to control that also, will test that when getting around to it :)

I live in Denmark, came in 20 hours from order :)

/Jacob

Good afternoon to you guys,

Today the parcel has finally been delivered after some twists mainly because of french laziness…

Now i have to find time but above all courage to solder the board and most of all, cut the track !

To be continued…