Beovision 9 parts

15 replies
IP
Offline
Ipe
Bronze
Posted February 20, 2024 at 16:42 GMT
#1662612
Hi,

Did it but no help:)  Press (Beo4) "menu", "0", "0", (zero, zero) and GO.

That is how you'll enter to service menu.

Location: Finland

Iksloworbod
Offline
Iksloworbod
Bronze
Posted February 22, 2024 at 08:42 GMT
#1662655
Hi:)

thank you very much for allowing me to enter the "service menu".

As in your case, the hard reset did not improve ACM performance.

HOWEVER, THERE IS A HUGE "ADDED VALUE":

1. I was able to go into the menu and check the counter

2. I could go to: menu/0/0/go/monitor/monitor service menu/picture adjustments/ADC adjustments and be able to adjust the color saturation.

You previously stated that you were satisfied with the colors of your BV9.

I have too much yellow and green and too little blue.

Could you send me a printscreen of the settings on your TV in the "ADC ADJUSTMENTS" tab?

I'm sending you my settings for comparison.

The link to enter "ADC ADJUSTMENT" is:

menu/0/0/go/monitor/monitor service menu/picture adjustments/ADC adjustments

Location: Brzeg/Poland

I am a happy owner of BV9 and BL5, completely addicted to their form and image and sound reproduction.
IP
Offline
Ipe
Bronze
Posted February 22, 2024 at 21:16 GMT
#1662677
Hope this helps

Location: Finland

Beobuddy
Offline
Beobuddy
BronzeFounder
Posted February 23, 2024 at 11:04 GMT
#1662692
Just a small reminder. The BV9 has to be switched on for at leasthalf an hour to be able to activate.
BTW, every panel has it's own settings, printed on the back of the panel. These settings has to set correct or at least not changed. The camera can adjust the colours of the panel, but probably only for fine-tuning. My panel went a little "greenish". Had done a lot of hours at that time. But the camera couldn't compensate that. Although the grey bar was rather greyish from top to bottom.

Location: Utrecht

Quite a challenge to achieve "Less is More" while having the Beovirus.
Iksloworbod
Offline
Iksloworbod
Bronze
Posted February 23, 2024 at 11:23 GMT
#1662693
@Ipe :)

Thank you for the photo of your settings - it helped me a lot because it made me realize that our panels are set up exactly the same.

Due to the fact that my panel in (color setting - "zero") the Black & White version was also slightly "greenish" with these settings, I lowered the green values and added blue :)

Now it's just perfect :)

I'm uploading my current settings, maybe someone will use them :)

@Beobuddy - thank you for your input:) Always wellcome:)

Location: Brzeg/Poland

I am a happy owner of BV9 and BL5, completely addicted to their form and image and sound reproduction.
or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold