Beovision 7 LED - LCD Panel disassamble?

8 replies
Tabloka
Offline
Tabloka
Bronze
Posted July 8, 2022 at 06:32 GMT
#1641037
Hi forum,

has anybody disassambled the LCD panel of a Beovision 7 with LED backlight? I don't ask for removing the LCD panel (I did it already) but to disassable the whole device itself. I have the problem with 'no backlight' and so I would like to check the LEDs individually.

Regards Michael
Guy
Offline
Guy
GoldModerator
Posted July 8, 2022 at 20:34 GMT
Edited July 8, 2022 at 20:38 GMT
#1647735
Can you find a part number somewhere, search for another brand TV in which the panel is used and then find a YouTube video to explain dismantling the panel itself?

I have just dismantled the panel in a edge-lit Samsung 32" TV to try to fix a backlighting problem. In my case it's actually unrepairable as the light diffuser sheet is cracked giving internal reflections. If it had simply been an LED problem it would have been an easy fix, hence well worth attempting.

In the Samsung I had to disconnect a couple of ribbon connectors from the timing controller to the LCD screen, unclip all around the screen and then the LCD panel simply pulled away to expose the LED edge strip (and diffuser sheet behind).

I couldn't find my exact model, but here's an example of one of the many videos that I referred to: https://www.youtube.com/watch?v=0h433tokO1U

EDIT: This video was also quite useful: https://www.youtube.com/watch?v=77tymvTJDxo

Location: Warwickshire, UK

My B&O Icons:

BeoCenter-9500.png BeoCenter-9500.png
Beoremote-Beo4.png Beoremote-Beo4.png
Beovision-10.png Beovision-10.png
Beotime.png Beotime.png
Beosound.png Beosound.png
Beosound-Explore.png Beosound-Explore.png
Beosound-Essence.png Beosound-Essence.png
Beoplay-P2.png Beoplay-P2.png
Beoplay-M3.png Beoplay-M3.png
Beoplay-H4.png Beoplay-H4.png
Beoplay-H3.png Beoplay-H3.png
Beoplay-Form-2i.png Beoplay-Form-2i.png
Beoplay-Earset.png Beoplay-Earset.png
Beoplay-A2.png Beoplay-A2.png
Tabloka
Offline
Tabloka
Bronze
Posted July 10, 2022 at 12:16 GMT
#1647756
link
EDIT: This video was also quite useful: https://www.youtube.com/watch?v=77tymvTJDxo
This video is quite interesting for my repair attemps. I have to look at the video a couple of times. Despite this is a B&O Beovision there is a SAMSUNG LCD panel inside. I don't know which one but the video is great. Thanks a lot. Michael
Tabloka
Offline
Tabloka
Bronze
Posted July 10, 2022 at 12:34 GMT
#1647757
JV
Offline
jvezina
Gold
Posted July 10, 2022 at 15:42 GMT
Edited July 10, 2022 at 15:44 GMT
#1647760
There is a sticker at the back of the panel itself with the Samsung brand. The model number is usually in bold. Take a picture and post it here.

 

My B&O Icons:

Beoremote-Beo4.png Beoremote-Beo4.png
Beovision-Eclipse.png Beovision-Eclipse.png
Beotime.png Beotime.png
Beoremote-One.png Beoremote-One.png
Beoplay-A1.png Beoplay-A1.png
Tabloka
Offline
Tabloka
Bronze
Posted July 11, 2022 at 13:19 GMT
#1647771
I dismanteled the LCD panel and could check the LED stribes. These are edge stribes with the number for L/H G1LE-400SMC-R6 and for R/H G1LE-400SMD-R6. Unfortunately they are NOT defect.

@jvezina: I couldn't find any sticker. But I have to say that I didn't remove the last layer. Nonetheless I could remove the two stribes.
JG
Offline
Jesper Godsk Nielsen
Bronze
Posted December 9, 2025 at 15:45 GMT
#1672137
Hi tabloka :)

Old thread here, but still relevant - if you ask me :)

I'm currently sitting with a 7-55" mk1, which has a half black screen, meaning that a little more than the right side of the screen is completely black. But if I take a powerful LED flashlight and illuminate the panel from the back, I can see there is an image on the entire screen, which tells me that it is either the LED driver, or the individual LED strips inside the Samsung panel.

How did your project go, did you manage to change or fix your LED strips :)

Best regards

Jesper G, from Denmark

Location: Denmark

BO
Offline
Bothom
Bronze
Posted June 27, 2026 at 20:57 GMT
#1673610
Interesting post!

I have a newly arisen problem with my BV 7-55 Mk2, which I posted about as a reply in this thread: https://forum.beoworld.org/forums/topic/beovision-7-55-mk2-thin-black-line-on-lcd/

It seems that the problem can be narrowed down to the T-CON board. The strange thing is that, in my case, the black row of pixels only appears once the BV has reached its normal operating temperature. Sometimes the black row disappears for a few minutes (restoring a normal picture) before reappearing. But most of the time the problem persists when the BV is on.

Do you think it is still possible to have this fixed at a B&O repair shop, or is the BV 7-55 Mk2 too old? Kind regards, Michael  

My B&O Icons:

Beoremote-Beo4.png Beoremote-Beo4.png
Beosound-Essence.png Beosound-Essence.png
Beosound-9000.png Beosound-9000.png
Beosound-35.png Beosound-35.png
Beoremote-Halo.png Beoremote-Halo.png
Beoplay-M5.png Beoplay-M5.png
Beoplay-H9i.png Beoplay-H9i.png
or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold