Beoplay V1 not turning on

49 replies
A friend of mine have a Beoplay V1 40" that will no lunger turn on When he is plugging the TV into an outlet the LED will blink green for a short while, but no reaction to remote commands at all. I have guided him through the proces of changing the option settings in case it should have ended up in option 0 for some reason. This however did not do any difference, and the TV does not give the red blink when the option is set. A google search doesn't give much, but I have seen a single mention of a leaking battery Searching for Beovision 11 problems I see one mentioning of a blown capacitor Both things sounds like plausible causes. Does anyone have anymore information regarding this or any experience in fixing it? I have a special interest in this as I also have a V1 myself, and would like to do some preventive measures on that if possible.

Location: Denmark

Does it show up in the B&O app or in the Beotool app (assumed it is online)? The leaking battery issue is probably more common than one might think. I know that in Denmark any serious dealer will replace the battery before selling a V1. All you can hope for is, that it has not already caused too much damage. I’d let a dealer or a skilled technician have a look, if it was mine. MM

Location: Flensborg————Danmark

Does it show up in the B&O app or in the Beotool app (assumed it is online)?
No unfortnuatly ha has not configured the V1 in the app before this happened

Location: Denmark

I have a faulty V1-32 that I bought with a similar fault with similar LED behaviour. I saw reference to a leaking battery somewhere on the forum so I opened up the TV and searched the PCBs inside, and found nothing remotely like a battery! I think my internal investigations damaged something else because now I get no lights whatsoever. It's now back in a box waiting for donor parts, or to become a donor! EDIT: Mine didn't show up in the app either (when connected to my network via RJ45).

Location: Warwickshire, UK

My B&O Icons:

BeoCenter-9500.png BeoCenter-9500.png
Beoremote-Beo4.png Beoremote-Beo4.png
Beovision-10.png Beovision-10.png
Beotime.png Beotime.png
Beosound.png Beosound.png
Beosound-Explore.png Beosound-Explore.png
Beosound-Essence.png Beosound-Essence.png
Beoplay-P2.png Beoplay-P2.png
Beoplay-M3.png Beoplay-M3.png
Beoplay-H4.png Beoplay-H4.png
Beoplay-H3.png Beoplay-H3.png
Beoplay-Form-2i.png Beoplay-Form-2i.png
Beoplay-Earset.png Beoplay-Earset.png
Beoplay-A2.png Beoplay-A2.png

Location: Denmark

so I opened up the TV and searched the PCBs inside
How did you approach the opening of the TV? The reason for asking is that the disassembly instructions mentions insertion of protection sheets, and I wonder if that is of a specific material or if it could just be a piece of paper or cardboard? I guess the purpose is to avoid scratches on the painted surfaces

Location: Denmark

When I first opened mine it was screen downwards on an old cot mattress. I re-inserted the top part of the bracket so it could pivot (unfold) upwards. I then reversed the tv so that the back was downwards and the screen carefully pivoted up.

Location: Warwickshire, UK

My B&O Icons:

BeoCenter-9500.png BeoCenter-9500.png
Beoremote-Beo4.png Beoremote-Beo4.png
Beovision-10.png Beovision-10.png
Beotime.png Beotime.png
Beosound.png Beosound.png
Beosound-Explore.png Beosound-Explore.png
Beosound-Essence.png Beosound-Essence.png
Beoplay-P2.png Beoplay-P2.png
Beoplay-M3.png Beoplay-M3.png
Beoplay-H4.png Beoplay-H4.png
Beoplay-H3.png Beoplay-H3.png
Beoplay-Form-2i.png Beoplay-Form-2i.png
Beoplay-Earset.png Beoplay-Earset.png
Beoplay-A2.png Beoplay-A2.png
I can only assume that those sheets would protect from scratches caused by opening the plastic ‘hinge’ beyond its normal range of movement.

Location: Warwickshire, UK

My B&O Icons:

BeoCenter-9500.png BeoCenter-9500.png
Beoremote-Beo4.png Beoremote-Beo4.png
Beovision-10.png Beovision-10.png
Beotime.png Beotime.png
Beosound.png Beosound.png
Beosound-Explore.png Beosound-Explore.png
Beosound-Essence.png Beosound-Essence.png
Beoplay-P2.png Beoplay-P2.png
Beoplay-M3.png Beoplay-M3.png
Beoplay-H4.png Beoplay-H4.png
Beoplay-H3.png Beoplay-H3.png
Beoplay-Form-2i.png Beoplay-Form-2i.png
Beoplay-Earset.png Beoplay-Earset.png
Beoplay-A2.png Beoplay-A2.png
When I first opened mine it was screen downwards on an old cot mattress. I re-inserted the top part of the bracket so it could pivot (unfold) upwards. I then reversed the tv so that the back was downwards and the screen carefully pivoted up.
Thanks. Thats a very helpfull view of TV opened up. I do not spot a battery here either, but could of course (why place it so it is easy to get to) be placed on the other side of the PCB. My best guess would be that it is placed on the large mainboard as the function is probably to keep data when the TV has no power. Other possible culprits could also be capacitors on the PSU board. Your photo shows two large ones placed in openings in the PSU board.

Location: Denmark

My friend opened up his V1 today and sent me some pictures from the inside. Although the mainboard look a lot like the one in Guy's V1 I not spot a component that could be a battery although the marking C304 suggest a capacitor. And from a slightly angled view There are no visible leaks from this component, but that of course does not men that it couldn't be defect. Any thoughts  

Location: Denmark

or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.