BL3 on table stands pls help

5 replies
LI
Offline
libor
Bronze
Posted July 2, 2022 at 04:04 GMT
#1641023
Hi Beofans,

would somebody with BL3's on table stands be so kind and tell me the total height? I have quite a limited space under cabinet and would like to be sure that my BL3's will fit after I buy  table stands, thanks.

Oh and how thick is the base plate? Is it more then 6 mm?
Tignum
Offline
Tignum
Gold
Posted July 2, 2022 at 18:35 GMT
Edited July 2, 2022 at 18:36 GMT
#1647583
Hi libor, welcome!

I do not have these speakers but found a pdf catalogue that says they are 32cm high:

I trust they will need a bit of space around them to work correctly, that will for sure be written in the manual.

At the B&O website you can download an '.obj' file of the BeoLab 3 that might give you the exact height of the base (using a CAD system).

Good luck, would be nice to see a photograph of the result in the 'Flash your B&O' thread!

Regards,

Johan

Location: Netherlands

My B&O Icons:

Beoplay-A1.png Beoplay-A1.png
Beoplay-H95.png Beoplay-H95.png
Beoplay-P6.png Beoplay-P6.png
Beoremote-Beo4.png Beoremote-Beo4.png
Beoremote-One.png Beoremote-One.png
Beosound-5.png Beosound-5.png
Beovision-10.png Beovision-10.png
Tignum
Offline
Tignum
Gold
Posted July 2, 2022 at 18:39 GMT
#1647584
The .obj file shows like this in my standard mac preview app (I cannot measure it there, sorry).

Location: Netherlands

My B&O Icons:

Beoplay-A1.png Beoplay-A1.png
Beoplay-H95.png Beoplay-H95.png
Beoplay-P6.png Beoplay-P6.png
Beoremote-Beo4.png Beoremote-Beo4.png
Beoremote-One.png Beoremote-One.png
Beosound-5.png Beosound-5.png
Beovision-10.png Beovision-10.png
Rolf2
Offline
Rolf2
Gold
Posted July 3, 2022 at 12:15 GMT
#1647594
Hi libor,

I can confirm a total height of 32 cm as Johan has displayed. I have the BL 3 on table stands in our bookshelf. In my case, I was able to build the bookshelf around the speakers :-).

The round base plate is 6 mm thick and it stands on rubber feet which take appr. 0,5 - 1 mm in height (I cannot measure more accurate, sorry).

I hope it helps.

Kind regards,

Rolf

Location: Germany

My B&O Icons:

BeoCenter-9500.png BeoCenter-9500.png
Beoremote-Beo4.png Beoremote-Beo4.png
Beosound.png Beosound.png
Beosound-9000.png Beosound-9000.png
Beoremote-One.png Beoremote-One.png
Beoremote-Halo.png Beoremote-Halo.png
Beoplay-H9i.png Beoplay-H9i.png
Beoplay-Form-2i.png Beoplay-Form-2i.png
Beoplay-Earset.png Beoplay-Earset.png
Beoplay-A8.png Beoplay-A8.png
Beoplay-A1.png Beoplay-A1.png
Beomaster.png Beomaster.png
Beolab-18.png Beolab-18.png
Beocenter-2.png Beocenter-2.png
Millemis
Offline
Millemis
Bronze
Posted July 4, 2022 at 14:03 GMT
#1647635
Hi libor.

If you have limited space/height there, why not go for the rubber stands instead?

Would also make it easier to point the speakers a bit up or down depending on what you’d need.

Please do not move these speakers too far back from the edge of the shelf/cabinet - the Acoustic Lenses need space for spreading the sound.

MM

Location: Flensborg————Danmark

or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold