Beolab 5 calibration vs power down

3 replies
BE
Ben88F
Bronze
14 posts
Posted June 8, 2023 at 06:59 GMT
#1642368
Dear all, During electrical storm, I usually power off my Beolab 5, and after that, I re run the calibration. Would you know if the Beolab 5 is able to recall the last calibration when power is off? Just wondering if it might be a dead battery I could change for those ma cases, but from what I see on electrical schematic, it is probably not such capability.   thanks!
Setup : BL 4000/2/3/5 mk1/20 Beoplay H6/H95 BS 4/ Transmitter 1
NQVHNWI
NQVHNWI
Bronze
1640 posts
Posted June 8, 2023 at 07:45 GMT
#1656966
The BL5 will keep its calibration in non-volatile memory. The last time I read-up on this, the Mk1 BL5 could keep only 10 calibrations and needed a Dealer re-set to clear the 10 memory allocations and to be able to re-calibrate. i.e. dont do resets unless you are changing the sonic signature of your listening room. Whether this limitation was address by the MK2.....or whatever version, I am not sure?  
BE
Ben88F
Bronze
14 posts
Posted June 14, 2023 at 13:57 GMT
#1657066
Thank you for the technical specs. I did not know that! i did a lot of reset as we had few electrical storm risk and I did not want to take any risk. I might have saturated the memory then as I have mk1. Always impress by knowledge on this forum!
Setup : BL 4000/2/3/5 mk1/20 Beoplay H6/H95 BS 4/ Transmitter 1
or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold