SC
schanzenbaecher
Bronze
8 posts
Posted April 1, 2024 at 09:41 GMT
#1643516
Hi all, my BG4002 with internal RIAA from the B&O upgrade kit shows the following wire connections on the board: two wires are connected (white and green corresponding to right and left channel). The red and the yellow wire are cut off and not connected to the board. The BG has a 5 pin braided signal cable from the upgrade kit. With high volume there ist background noise and hum. Has somebody experience with the wire connections of the B&O upgrade kit? I appreciate your help. Peter  

My B&O Icons:

Beoremote-Beo4.png Beoremote-Beo4.png
Beovision-Avant.png Beovision-Avant.png
Beosound.png Beosound.png
Beosound-Stage.png Beosound-Stage.png
Beoremote-One.png Beoremote-One.png
Beomaster.png Beomaster.png
Beolab-18.png Beolab-18.png
Beogram-400x.png Beogram-400x.png