Beogram 1200 with phono cables humming.

3 replies

Hey,

I'm in the process of renovating a Beogram 1200 with came with phono cables instead of DIN cable.
When I connect it to a Beomaster 5500 there's a annoying humming when using the deck. I don't think it's the 5500 as I have two and have tried both. The cables includes the lead which I connect to the finger screw on the back of the 5500.

Now when I insert the original pre amp card in the deck and connect the phono cables to line in the humming is gone. That tells me that the issue must be in the deck but all connections seems in the right place so I'm a bit lost.

Peter

The DIN cable has a double shield. Each channel has a shield and the entire cable has one. It’s quite possible the phono cables were not grounded properly inside. Generally, tying all three together at a single ground point has worked for me in the past. 

Mark wrote:

The DIN cable has a double shield. Each channel has a shield and the entire cable has one. It’s quite possible the phono cables were not grounded properly inside. Generally, tying all three together at a single ground point has worked for me in the past. 

Thanks Mark,

I was thinking along those lines so I decided to replace it with an original DIN cable and voila the humming is gone. But if there ever is a next time I will try your advice.

Peter

 

or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.