Beo5CTSetup_1.30.exe

6 replies
S(
Offline
sinikabh (archived)
Bronze
Posted June 28, 2008 at 13:48 GMT
#1779899

Hello B&O friends,

 i have a problem while installing Beo5CT. Version 1.3

I obtain the following error:

Error 1901. Error attempting to read from the source C:/windows/installer/2914332a.msi.

The error change everytime *.msi. * means 23eed or 295b66d1 or other.

Know someone something about this problem?

What is my mistake? The BEO5 must be connected on USB while setup?

I must have an older Version to install Vers. 1.3? 

The size of thze software is 66,8MB.

For help i would be very thankfull.

Regards Peter

P.S.: sorry for my englisch i´m from Germany 

Peter
Offline
Peter
Gold
Posted June 28, 2008 at 14:49 GMT
#1779900
The new software comes with a firmware patch but to get this you need to be connected to the B&O site - and I doubt you can. Once the firmware is on the Beo5, the software should work - mine does.

My B&O Icons:

BeoCenter-9500.png BeoCenter-9500.png
Beoremote-Beo4.png Beoremote-Beo4.png
Beovox.png Beovox.png
Beovision-11.png Beovision-11.png
Beotime.png Beotime.png
Beosound-Stage.png Beosound-Stage.png
Beosound-Moment.png Beosound-Moment.png
Beosound-5.png Beosound-5.png
Beosound-2.png Beosound-2.png
Beoremote-One.png Beoremote-One.png
Beoplay-Portal.png Beoplay-Portal.png
Beoplay-Earset.png Beoplay-Earset.png
Beomaster.png Beomaster.png
Beolit.png Beolit.png
Beogram-400x.png Beogram-400x.png
Beocenter-2.png Beocenter-2.png
S(
Offline
sinikabh (archived)
Bronze
Posted June 29, 2008 at 04:39 GMT
#1779901

Hello,

thank you for message!

i have tried once more with  a new uploaded version 1.3 and now i obtain a different error: first error 1336 and then by interrupting error 2350.

i have tried on differnet PC. one with XP SP2 and newest updated and newest Windows installer. IE7. Other with Windows XP SP3 newest version and also IE7. On all PC the same Problem. Perhaps you have an idear to resolut the problem?

i will also try the older version. i obtain this today.

Regards

Peter 

S(
Offline
sinikabh (archived)
Bronze
Posted June 30, 2008 at 03:08 GMT
#1779902

Hello Together,

 the problem is resolved! It was an bite errror by uploading!

The installation is complete and i have go with programming.

A new problem is, that my Windows don´t recognize teh Beo5.

She is connected with normal miniUSB to USB to my computer. It is a special cable to connect? Perhaps someone has a picture from this cable so i can found it in my lots of cables!?

Regards

Peter 

 

Peter
Offline
Peter
Gold
Posted June 30, 2008 at 05:38 GMT
#1779903

It may be your USB controller. It is worth turning the Beo5 off before putting it on the charger connected to the computer though. There are some threads about this.
 

My B&O Icons:

BeoCenter-9500.png BeoCenter-9500.png
Beoremote-Beo4.png Beoremote-Beo4.png
Beovox.png Beovox.png
Beovision-11.png Beovision-11.png
Beotime.png Beotime.png
Beosound-Stage.png Beosound-Stage.png
Beosound-Moment.png Beosound-Moment.png
Beosound-5.png Beosound-5.png
Beosound-2.png Beosound-2.png
Beoremote-One.png Beoremote-One.png
Beoplay-Portal.png Beoplay-Portal.png
Beoplay-Earset.png Beoplay-Earset.png
Beomaster.png Beomaster.png
Beolit.png Beolit.png
Beogram-400x.png Beogram-400x.png
Beocenter-2.png Beocenter-2.png
S(
Offline
spirost (archived)
Bronze
Posted July 18, 2008 at 06:26 GMT
#1779904

Well!!!!

 

It seems that the software is travelling around!! As far as I had the chance to hear B&O intends to supply the software to the customers in the future. Any ideas about it?

or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold