Sign in   |  Join   |  Help

Search

  • Re: Beolink 7000 back light and recapping.

    I just had a look on Conrad and if I’m looking at the right part (article number 1565919) it says it will be back in stock 17th June. BeoMedia
    Posted to The Workbench (Forum) by BeoMedia on Mon, Jun 15 2020
  • Re: Beolink 7000 back light and recapping.

    I just had a look on Conrad and if I’m looking at the right part (article number 1565919) it says it will be back in stock 17th June. BeoMedia
    Posted to The Workbench (Forum) by BeoMedia on Mon, Jun 15 2020
  • Re: Beolink 7000 back light and recapping.

    I just had a look on Conrad and if I’m looking at the right part (article number 1565919) it says it will be back in stock 17th June. BeoMedia
    Posted to The Workbench (Forum) by BeoMedia on Mon, Jun 15 2020
  • Re: BeoCord 7000 - dull sound issue

    Heads have been cleaned thoroughly. I should have mentioned that, sorry. Azimuth - I haven’t touched this. Can I perform this myself or will I need specific tools? Tanks, BeoMedia
    Posted to General Discussion & Questions (Forum) by BeoMedia on Sat, May 2 2020
  • BeoCord 7000 - dull sound issue

    Hello, I have a perfectly working BeoCord 7000 besides the sound quality which I think sounds rather dull. Not as dynamic or clear as I recall they were when new (I had this system from new many years ago so comparing to how I recall it to sound). It helps a little when I turn off Dolby noise reductions but still not perfect. Any advise please? Any capacitors that should be replaced if so which ones? Many thanks BeoMedia
    Posted to General Discussion & Questions (Forum) by BeoMedia on Sat, May 2 2020
  • Re: Beomaster 6500 slight overhaul

    Hi Mika and others reading this thread. Firstly a quick recap of the tuner problem: It plays static noise and occasionally it will randomly catch on to a signal (after been disconnected from mains for some time) that is not super clear. Changing the frequency (the stored channels) does indeed show a new frequency but plays the same as if it has not changed the frequency though the display suggests this. I cannot tune for a strong signal as tuning (auto or manual) does not find a signal. Since my
    Posted to The Workbench (Forum) by BeoMedia on Sat, Apr 18 2020
  • Re: Beolab 3500 sound troubles

    Hi Steve, This will not work for me I'm afraid as it is attractive for me to be able to use my Beo4 for the Samsung TV (which prevents me from using the beoLab 3500 the way you describe). I hadn't realised that you had a BeoLab 2000 (ML to 3.5mm jack) cable, cool, I will check this out a little later when I get to my BeoLab 2000. If I go down the BeoLab 3500 route I will try to use test mode 3 rather than 4 as this will allow me to work with a line signal rather than a live speaker level
    Posted to General Discussion & Questions (Forum) by BeoMedia on Wed, Jan 1 2020
  • Re: Beolab 3500 sound troubles

    Hello, I too have a BeoLab 3500 which I would like to put to use as a center speaker to my Samsung (while being connected to a ML system). I have activated the MCL by pressing: MENU 04 GO. Questions: a) My BeoLab 3500 turns itself off (leaves the service mode) every time I press ANY button on the Beo4. For instance if I press VOLUME UP it turns off (or any other command). Would any of you have a solution for this challenge? This is a problem for me as it prevents me from using the BeoLab 3500 as
    Posted to General Discussion & Questions (Forum) by BeoMedia on Wed, Jan 1 2020
  • Re: Beomaster 6500 slight overhaul

    [quote user="tournedos"]...the tuner problem is probably something else than caps, and it is easy to get back to that later anyway because the board is the first to come off.[/quote] Hello again, I have replaced caps on the BeoMaster and the IR reception is perfect again. I also replaced the backup battery while I was in there and it turned out it was a little sweaty underneath so timing was good. However - my radio reception does not work. Occasionally when fiddling around with it I may
    Posted to The Workbench (Forum) by BeoMedia on Sat, Oct 12 2019
  • Re: Beomaster 6500 slight overhaul

    Thanks again Mika, One last question before I order the parts. I have noticed in your thread that for certain parts of the job you have opted for MKS capacitors rather than aluminium electrolytic caps. What is the reasoning behind this and which would you recommend me to use for the following: Output and and power supply: C8, C9, C11 and C14 CPU circuit board: C57 and C35 Tuner circuit board: C201, C401, C207, C407 and C35 Can the MKS ones better withstand exposure to the heat inside the BeoMaster
    Posted to The Workbench (Forum) by BeoMedia on Tue, Apr 16 2019
Page 1 of 6 (59 items) 1 2 3 4 5 Next > ... Last ยป | More Search Options
Beoworld Security Certificate

SSL