Sign in   |  Join   |  Help

Search

  • How Reset BeoCom 3 Phone

    Do you guys know if there is a way to reset/restore BeoCom 3 phone to its factory defaults? Googling or searching manual didn't turn up anything. Thanks!
    Posted to General Discussion & Questions (Forum) by deeonline on Tue, Oct 31 2017
    Filed under: beocom 3
  • Re: How Reset BeoCom 3 Phone

    Thank you, sir. That explains why I am having hard time finding this info online. :) The issue I am having with a couple of these phones is that there is some sort of background monotone noise interfering with the dialtone. If I touch around the base, it temporarily goes away, but the as soon as someone starts talking or I dial another number it comes back. I thought maybe factory reset could take care of it. Also, the phone has a bunch of entries in the address book that I thought a reset could
    Posted to General Discussion & Questions (Forum) by deeonline on Tue, Oct 31 2017
  • Re: How Reset BeoCom 3 Phone

    I've purchased these two BeoCom 3 phones on eBay here in US. I have a couple ones around the house, but they seem to work fine (at least the background tone is not that noticeable). Don't know anything about the ISDN really. I have them plugged in into OOMA VoiceIP device via Leviton distribution board. If I understood correctly, there should be a US and a EU version of BeoCom 3? Anyway to check which one I have?
    Posted to General Discussion & Questions (Forum) by deeonline on Tue, Oct 31 2017
  • Re: BeoCom 1 Wheel Stopped Working

    Thank you for your suggestions. Unfortunately, I think Keith is right. This issue appears to be with the board itself. It goes away, when I temporary replace it with the board from another phone. Changing batteries make no difference. I guess I'd have to wait until someone sells BeoCom 1 for parts on eBay.
    Posted to General Discussion & Questions (Forum) by deeonline on Thu, Sep 28 2017
  • Re: BeoCom 1 Wheel Stopped Working

    If this is not something that can be fixed by resetting, is it still possible to have it repaired. I know B&O stores no longer carry them, but is there anyone in US who could fix them? The problem goes away, if I replace the motherboard with the motherboard from my other BeoCom 1 phone.
    Posted to General Discussion & Questions (Forum) by deeonline on Mon, Sep 25 2017
  • BeoCom 1 Wheel Stopped Working

    Hi, I have a strange problem with one of the BeoCom 1 handsets. When powering up starts, the center wheel seems to be working, at least it makes that clicking noise. However, a few seconds later it goes silent and when the phone boots up it doesn't work. All other buttons work fine. Also, if I keep spinning the wheel the whole time the phone is booting, it continues to work. It even works after the boot if I keep on spinning. Once I let it go, a few seconds later it goes silent again and no longer
    Posted to General Discussion & Questions (Forum) by deeonline on Sat, Sep 23 2017
    Filed under: beocom 1
  • Re: BeoSystem 3 IR Receiver wiring config

    Guys, the BeoVision 7-pin IR puck has the 2nd pin marked as "Blue (Light)". Any idea what this is and what DB9 pin it should be connected to? I've mapped all other wires, but this one still puzzles me.
    Posted to General Discussion & Questions (Forum) by deeonline on Mon, Jun 5 2017
  • Re: BeoSystem3 not communicating with BeoVision4

    [quote user="Beobuddy"] Is the serial cable an original B&O version? As I can remember it needs a crossed cable TX to RX and RX to TX. So on one side pin 2 and 3 are changed. [/quote] Contrary, in my setup it wanted a straight serial cable with pins 2-3-5 to pins 2-3-5. The reverse one (null modem) didn't work. Took me a few days to figure this out by trial and error.
    Posted to The Workbench (Forum) by deeonline on Mon, Jun 5 2017
  • Re: How to test auto contrast with BeoVision 4-65

    Thanks Beobuddy. This could be the video I've seen. However, my Pana remote doesn't have a "Picture" button ( see this image ). Is there a different way to access this menu or do I need a different Panasonic remote?
    Posted to General Discussion & Questions (Forum) by deeonline on Wed, May 31 2017
    Filed under: panasonic remote
  • How to test auto contrast with BeoVision 4-65

    Hi. I have BV4-65 (type 8959) connected to BS3 running 3.1 software. Can you please tell me how I can test the auto-contrast feature to make sure it's working? Covering the IR puck doesn't seem to make any visual difference. I've seen a YouTube demo on BV9 when this action changes contrast values in the Panasonic "Picture" menu, but the "Picture" menu option is missing when I push "Menu" on my Panasonic remote. Thank you!
    Posted to General Discussion & Questions (Forum) by deeonline on Tue, May 30 2017
    Filed under: Beosystem 3
Page 1 of 5 (43 items) 1 2 3 4 5 Next > | More Search Options
Beoworld Security Certificate

SSL