Sign in   |  Join   |  Help

Search

  • Re: Beogram 120X / Beocord Dust Cover polishing

    Very nice work, thanks for sharing
    Posted to The Workbench (Forum) by Peter8300 on Sat, May 15 2021
  • Beogram TX2 tonearm goes out and returns to base.

    I recently got a TX2 for free. The owner tried to fix a ticking motor by pulling out some of the gears and assembled it wrong. It was completely stuck. I managed to get it working (or so I thought). It starts up all-right, pulls the tonearm to the record, lowers the arm but immediately raises the arm and pull it back to base. I thing I might have identified that the problem has something to do with the Lift Lower Cam Wheel but really can't get closer to the solution. The wheel turns and lower
    Posted to BeoGram (Forum) by Peter8300 on Fri, May 14 2021
  • Re: Beogram CD 5500 open and then close?

    Allright as per Manfy's great suggestion I went through our kitchen drawer where all kinds of rubber bands are kept. I experimented with a few and came up with a band 1mm thick, 5mm wide and 30mm long. I glued the ends together as shown in the picture and installed it on the stop. I might experiment with making it so there's a loop going around the pin in order to hold it more securely in place. Why the plastic part have gears on half of it I really don't know. The stop is also used to
    Posted to The Workbench (Forum) by Peter8300 on Fri, May 7 2021
  • Re: Beogram CD 5500 open and then close?

    Flat rubber band, that's a great suggestion I'll get right to work (tomorrow) and report back ASAP.
    Posted to The Workbench (Forum) by Peter8300 on Wed, May 5 2021
  • Re: Beogram CD 5500 open and then close?

    [quote user="manfy"] Could you be a bit more specific? With "adjustment screw", do you mean that white eccentric plastic gear you're pointing at with the torx screw driver?? If so, I don't really see that in the service manual -- and the manual doesn't say anything whatsoever about any adjustment. The part that comes closest in the explosion drawing is part #9016 p/n3010029 Stop Block Rubber ! So I would guess this gear is some sort of stopper/clamping mechanism for
    Posted to The Workbench (Forum) by Peter8300 on Wed, May 5 2021
  • Re: Beogram CD 5500 open and then close?

    So at this point the machine plays CD's and the tray works as it should. Now to the last issue. The tray is not sitting in the right position in relation to the front. It is purely cosmetic but there must be a way to adjust that unless something have been bent by someone else before me. There's the adjustment screw next to the drive wheel (or whatever it's called) which kinda fell apart when I opened up the machine. I can adjust the tray with it but not better than the images below. Also
    Posted to The Workbench (Forum) by Peter8300 on Mon, May 3 2021
  • Re: Beogram 6500 Scraping Sound when half of the record has played

    You probably need to adjust the platter. Google Beograd 6500 Service Manual, it’s described in there how to do it. I just helped a friend with the same issue with the same solution. Peter
    Posted to BeoGram (Forum) by Peter8300 on Sat, May 1 2021
  • Re: Beogram CD 5500 open and then close?

    Update, cleaned the laser with a Q-tip and isopropyl alcohol and now it spins and reads the dish. Still need to check if sounds come out of it, that comes later. So now I need to work on the issue with the tray getting pulled a little to far in on the left side (motor side) And of course get the parts from Martin.
    Posted to The Workbench (Forum) by Peter8300 on Sat, May 1 2021
  • Re: Beogram CD 5500 open and then close?

    Makes sense. I will try to clean the laser and report back. Peter
    Posted to The Workbench (Forum) by Peter8300 on Sat, May 1 2021
  • Re: Beogram CD 5500 open and then close?

    Thanks Martin, I will order the parts together with some other parts I need. Any idea as to why the it won't spin and and play a CD whereas it will spin without a CD? Before disassembly there was no problem, so I guess I must have f***** something up. I didn't disassemble the CD mechanism only took off the CD tray for cleaning and put it back on. Peter
    Posted to The Workbench (Forum) by Peter8300 on Sat, May 1 2021
Page 6 of 7 (62 items) « First ... < Previous 3 4 5 6 7 Next > | More Search Options
Beoworld Security Certificate

SSL