Sign in   |  Join   |  Help

Search

  • Beogram 1200 dead right channel

    Dear all, I'm working on a BG 1200, got it working all the way except there's no signal in the right channel. I have measured from the DIN plug to the per amp socket, from the pre amp socket to the pick up socket and from the pick up socket all the way to the DIN plug and there's signal all the way. I have tested with several known good pickups and another deck so the issue has been isolated to the 1200, but I'm stuck with no cue about what to look for. Any ideas? Peter
    Posted to BeoGram (Forum) by Peter8300 on Mon, Sep 20 2021
  • Logo sticker for Beogram 1200 / 1202 / 1203 dust cover

    I'm looking for a source from where to get the logo stickers for the dust covers for BG 1200 / 1202 / 1203. Anyone know of one? Peter
    Posted to BeoGram (Forum) by Peter8300 on Mon, Aug 30 2021
  • Re: Logo sticker for Beogram 1200 / 1202 / 1203 dust cover

    I didn't think of that but you are of course absolutely right Peter
    Posted to BeoGram (Forum) by Peter8300 on Mon, Aug 30 2021
  • Beogram 3000 with MMC pickup - ever seen this?

    Hi, Have any of you ever seen a BG3000 like this? Notice the control knob with the selections beneath as well as the modifications done to accept MMC pickups. The story is that's is custom built by a worker at B&O due to his son destroying the original pickup. Peter
    Posted to BeoGram (Forum) by Peter8300 on Mon, Aug 30 2021
  • Re: Beogram 3000 bearings and idler

    Ok I installed the motor and put everything together and then the noise was unbearable. I sounded like something was grinding inside. Took it apart again and this time tried to center the motor using four round toothpicks. There's two "holes" on each side of the rotor, I stuck the toothpicks in those before bolting the motor together and then removed them again. Put everything together again and voila no noise. Sorry forgot to take pictures, next time.. Peter
    Posted to BeoGram (Forum) by Peter8300 on Thu, Aug 5 2021
  • Re: Beogram 3000 bearings and idler

    Ok I installed the motor and put everything together and then the noise was unbearable. I sounded like something was grinding inside. Took it apart again and this time tried to center the motor using four round toothpicks. There's two "holes" on each side of the rotor, I stuck the toothpicks in those before bolting the motor together and then removed them again. Put everything together again and voila no noise. Sorry forgot to take pictures, next time.. Peter
    Posted to BeoGram (Forum) by Peter8300 on Thu, Aug 5 2021
  • Re: Beogram 3000 bearings and idler

    [quote user="Saint Beogrowler"] I don’t understand your question. It only goes back together one way. [/quote] In my original printed copy of the BG 1202/3000 service manual (see pic) it is stated that the motor should be centered using two gauges before it is bolted together. I found a scanned copy online where this is not mentioned. Peter
    Posted to BeoGram (Forum) by Peter8300 on Wed, Aug 4 2021
  • Re: Beogram 3000 bearings and idler

    [quote user="Saint Beogrowler"] I don’t understand your question. It only goes back together one way. [/quote] In my original printed copy of the BG 1202/3000 service manual (see pic) it is stated that the motor should be centered using two gauges before it is bolted together. I found a scanned copy online where this is not mentioned. Peter
    Posted to BeoGram (Forum) by Peter8300 on Wed, Aug 4 2021
  • Re: Beogram 3000 bearings and idler

    [quote user="Peter8300"] Great description thanks, very helpful. How do you guys get the motor centered when reassembling it? And do you replace the felt? Peter [/quote] No one? Do you just play it by ear or? ;-) On another note I'm trying to upgrade my membership to Silver and it seems something is out of order, I'll start a thread about that at the appropriate place. Peter
    Posted to BeoGram (Forum) by Peter8300 on Tue, Aug 3 2021
  • Re: Infusing beogram's bearings…

    Old post I know. I'm planning to use the same method as conserving food. A jar with rubber between the jar and the lid. Oil and bearings in, close the lid and slowly heat the the jar in water until 90C degrees or so. Hopefully that will create a vacuum but maybe not at the oil has a boiling point of 300C. Hmmm might rethink that.
    Posted to The Workbench (Forum) by Peter8300 on Sat, Jul 31 2021
Page 1 of 6 (57 items) 1 2 3 4 5 Next > ... Last » | More Search Options
Beoworld Security Certificate

SSL