Sign in   |  Join   |  Help

Search

  • Re: Avant 32 Link compatibility

    >>Sorry, it`s been a long time, but I didn`t forget this little test... << Thanks for your tenacity and patience! >>I`d try to set the MCL2 AV to L.OPT 0 and disconnect the transceiver. All IR controling should lead through your link-BV (Avant). BTW: I don`t understand, why you have to press AV and at the same time hold Timer button on the transceiver. Usually in an MCL setup you simply mute the sound and press Stdby to shut down the link-BV. This should work in your setup...(?
    Posted to General Discussion & Questions (Forum) by david707 on Wed, Jan 13 2016
  • Re: Avant 32 Link compatibility

    [quote user="stefan"] Standby mode of the MCL2 AV should be triggered via Datalink through the link Beovision...(??) Does Standby system work? AV-A.AUX is A.AUX in videomode. This should open the TV/AUX socket. This should happen if you select a video source on your link BV....(??) Are there Beolabs connected to MCL 2 AV ? Stefan [/quote] Standby system works but I prefer local (link room only) standby which I have set at the moment. I see no way of setting this without the tranceiver as
    Posted to General Discussion & Questions (Forum) by david707 on Thu, Dec 24 2015
  • Re: Avant 32 Link compatibility

    [quote user="stefan"] The 1611 does not necessarily expect an audio product on the ML side. It depends on your setup. If it will detect a video product on the ML side like in your setup (Avant) it will expect an audio product connected to the AAL side. The AAL socket is connected to the TV/AUX socket of your MCL2 AV. So you have connected two audio sockets via a 7pin Datalink cable. If you look at the wiring of a 7pin Datalink cable you will notice that for example left channel out of an
    Posted to General Discussion & Questions (Forum) by david707 on Thu, Dec 24 2015
  • Re: Avant 32 Link compatibility

    >>BTW_ usually you don`t need an IR transceiver on the MCL 2 AV if a BV is connected. IR will be transmitted via datalink through the BV.<< I have had the tranceiver disconnected and yes it works - but this way I can't select some of the options on the MCL2AV for e.g standby options. I also don't think I can select AV-A.AUX without it connected. David
    Posted to General Discussion & Questions (Forum) by david707 on Mon, Dec 21 2015
  • Re: Avant 32 Link compatibility

    Yes BL converter 1611 connected to "TV" on the MCL2AV using 7/7 DIN cable. I have tried other cables so no fault with it. Avant is in V.OPT 6 >>It`s not tested - just a guess. But usually in an AV setup the AUXout port of an audio product is routed to AUXin of your video product. What happens if a video out (TV/AUX of MCL2 AV) is connected to another video product (AUDIO AUX LINK of your BL converter)? No sound...<< If the 1611 'expects' an audio device on the ML side
    Posted to General Discussion & Questions (Forum) by david707 on Mon, Dec 21 2015
  • Re: Avant 32 Link compatibility

    To update I tried an MX4002 with a similar result so no fault with the Avant. Contrary to my initial post these ML TV's are switching the audio master to AUX from the link room but the sound is not coming through (from video sources). It appears putting an ML product on the end of an MCL does not fully work so I may have to revert to an MX7000 or similar in the link room. David
    Posted to General Discussion & Questions (Forum) by david707 on Wed, Dec 16 2015
  • Re: Avant 32 Link compatibility

    The situation has resulted from a change in my main room from Avant to BV8-40 ...and in the link room from LX5500 to the Avant. I also put an MCL system into my home when it should probably have been ML. Thank you for the suggestions regarding the connection sequence which I will try out in this order BV8-40>1611>Beocenter 9500>MCL2AV>Avant>1611. I thought the 1611's automatically configured. I will also try an MX4002 in place of the Avant to see if the problem is still evident
    Posted to General Discussion & Questions (Forum) by david707 on Fri, Dec 4 2015
  • Re: Avant 32 Link compatibility

    [quote user="RaMaBo"] How is the Avant connected to the MCL2AV ?? What is the option setting for the Avant? It should be set to L-OPT6 so that it gets the video sound from the main room by selecting AV L.TV or AV L-VTape. A simple AV TV should give the link rooms TV sound. [/quote] The Avant is connected to the MCL2AV using a Beolink converter type 1611 and is in v.opt 6. Link is in option is 2 there is a tranceiver attached. With the LX5500 hooked up I just press AV followed by the video
    Posted to General Discussion & Questions (Forum) by david707 on Thu, Dec 3 2015
  • Beolink Video Type 1615

    Can the Beolink Video 1615 be used as an alternative to the 1611 converter? I have an Avant 32DVD not quite compatible with the MCL2AV using a 1611 converter. (it will not switch the audio master over to 'aux' for stereo sound on video sources so I am stuck with RF sound). The best way would be to connect the Avant to the video master (BV8-40) using ML but this would not be easy. Can the Beolink Video work as a converter for MCL> ML or only the other way round? Advice appreciated David
    Posted to General Discussion & Questions (Forum) by david707 on Wed, Dec 2 2015
  • Avant 32 Link compatibility

    Using an Avant 32DVD as a link TV on an MCL system but having problems as the TV won't switch the audio master to 'aux' for video sound sources. If I plug the audio master (BC9500) directly into the 1611 converter it switches over but not via the MCL2AV. I have an LX5500 which works fine via the MCL2AV. Is there a known issue with the Avant regarding this? The Audio side is no problem - only video sources.
    Posted to General Discussion & Questions (Forum) by david707 on Mon, Nov 30 2015
Page 8 of 15 (141 items) « First ... < Previous 6 7 8 9 10 Next > ... Last » | More Search Options
Beoworld Security Certificate

SSL