Search

Hej Der er lavet nogle få MCP7000 helt i sort så de matcher det sorte Beosystem7000, men de har heller ikke RDS visning da de teknisk er identisk med MCP5500/6500, en mulighed er dog dette display der kan vise RDS informationerne via MCL: http://home.swipnet.se/ridax/display.htm om det stadig kan leveres ved jeg dog ikke da Ridax som laver det til tider har været svær at få fat i. mvh Søren

Hi I have A problem with both my B eola b 8000, when I turn the stereo on they remain in std. b y with the red diode on If I turn the power off for A couple of hours they work fine for about 30 minutes and then they both goes back to std.by (not at the same time but within 10 minutes) the problem started on the left speaker about a month ago and on the right speaker last week. I have the service manual and I think that the problem is on pcb02 power supply maybe some bad capacitors in the std.by circuit

Hi again and thanks for the advice. I finally get them back in working order, I cleaned the pcb and the connections, checked the voltages according to the service manual and used them for about a week before putting them back together and everything seems to be ok:-) Yes I am from Denmark, but also here it can be difficult to find a good repair man. A few years ago you could go to your locale B&O dealer and talk to the technician yourself. But today only a salesman is present, and all he says

Hi Paul That should be possible, a friend of mine has a setup with Beovision 11-46 and a Beosound A6 connected to A Beosystem 7000 and Avant 28 via 1611 and ML/NL, he has full access to all the sources in the Beosystem from both the A6 and Beovision 11-46. Søren

Thanks Michael I figured it out when it is Beo4 AV mode it sends out the same command as Beo4, when it is in Beo4 audio mode it sends "AV TV" when you press "TV" and when it is in Beo4 video mode it sends "AV RADIO" when you press "RADIO"