Sign in   |  Join   |  Help

Search

  • Re: Which Beomaster 6000 - mid70ties or mid 80ties model ???

    Hi Olly, hi Jaques, have a Beocord 5000 Type 4705 in a good working condition but i'm also a bit afraid of the dark cloud chewing tapes over this nice tapedeck. I'm interested in both modifications. so would be pleased if you can you send me both proposals.
    Posted to Vintage Products (Forum) by RaMaBo on Tue, Jul 23 2013
  • Re: Light controll

    Hi, the B&O LC2 dimmer will be switched of with <LIGHT> followed by <STOP> just like your Bosscom dimmer so it works correct. Why they stopped the production of the LC2? Probably one or more parts were no longer available.
    Posted to General Discussion & Questions (Forum) by RaMaBo on Tue, Jul 23 2013
  • Re: Beocenter 2300 CD issues.

    Hi, the CDM-4 Unit moves the laser in an arc whereas the later units move linear. The CDM-4 very often suffers from the 'C2103' problem. In the Beocenter 2300 / 2500 it's the C100 on the 'CD SERVO Motor System AND DISC DETECTOR' Board 97. The Capacitor is a 47µF connected between Pin 17 of TDA 8808T and Ground (Focus Servo).
    Posted to The Workbench (Forum) by RaMaBo on Thu, Jul 18 2013
  • Re: Operating frequencies of Beo4

    Hi, B&O used 455 KHz as carrier frequency at least since Beolink 1000, every remote afterwards used it also. Only with Beo 5 and 6 you can send with a lower freq. To receive the 455 KHz you can try to get a TSOP7000 (Standard package like other receiver chips) or the TSOP5700 which is the SMD version. Both are capable of receiving the 455 KHz IR signal, demodulate it and give the transferred information at its output. Another possible solution is an old MCL Tranceiver which also receives 455
    Posted to General Discussion & Questions (Forum) by RaMaBo on Sun, Jul 14 2013
  • Re: Beosound 9000 - Black edition

    And don't forget the shipping cost of 7000 pounds !
    Posted to eBay - the right way! (Forum) by RaMaBo on Thu, Jul 4 2013
  • Re: Ps3 to Beovision 3

    Hi Chris, the beovision gives an excellent picture in SD but no HD picture could be presented. If the PS3 emits component signal at it's connector the BV3 can not display a good picture. You have to set the PS3 to S-Video or Combined Video (FBAS). S-Video would give you the best quality but even combined Video should be quite acceptable because of the fantastic image processing of the BV3. Keep in Mind that the BV3 uses the same chassis as the later Avant RF. You need an adaptor from S-Video
    Posted to General Discussion & Questions (Forum) by RaMaBo on Mon, Jul 1 2013
  • Re: Avant Dolby Digital Modul and DTS

    Thank you Beobuddy. Your info tells me that i'm just one small step behind the required version. Now hoping that someone has read the EPROM and saved to a file and would be so kind to send a copy to me :)
    Posted to General Discussion & Questions (Forum) by RaMaBo on Wed, Jun 26 2013
  • Avant Dolby Digital Modul and DTS

    Hello, does anyone know from what software version the B&O DolbyDigital module for the Avant / Beovision 3 was capable of decoding not only AC3 but also DTS? The wiki only states that the latest DTS capable software version is V3.1 but when did the support for DTS start? And maybe someone has the software as a HEX or BIN file that he or she wants to send to me so that i can program the necessary chip and replace the existing one which is AC3 V2.1. Thanks in advance
    Posted to General Discussion & Questions (Forum) by RaMaBo on Tue, Jun 25 2013
    Filed under: Avant dolby Digital DTS
  • Re: Beomedia 1

    Hallo, probier doch einmal den Befehl N-Music anstatt PC. Rührt sich dann vielleicht mehr? Theoretisch sollte der BV 8 sich einschalten, auf den Anschluß des BM1 schalten und der BM 1 sollte sich ins Menu Net Music begeben (und der rote Punkt rechts unten sollte auch verschwinden).
    Posted to Deutsche BeoWorld (Forum) by RaMaBo on Wed, Jun 12 2013
  • Re: Philips MFB 541 - OK to use with Beocenter 2300?

    Hi, this should work fine. The switch (SKC) at the back of the MFB's should be set to 1V / 10KOhm (upper psoition) and the other switch (SKD) should be set to left / right according to the positioning of the speakers. Any 5 Pin DIN cable ( 5Pin plug to 5 pin plug) should work. The speakers are activated by the signal they receive, not by the B&O Power Signal. Just plug the DIN cable into the powerlink socket of the Beocenter 2300 and the other end to one speaker IN. then from this speakers
    Posted to General Discussion & Questions (Forum) by RaMaBo on Mon, Jun 3 2013
Page 51 of 56 (555 items) « First ... < Previous 49 50 51 52 53 Next > ... Last » | More Search Options
Beoworld Security Certificate

SSL