Sign in   |  Join   |  Help

Search

  • Re: is a current PUC list available?

    Hi, those Technisat HD S2 receivers are great SAT settop boxes. The corresponding HD K2 uses the same IR codes as the HD S2 if you need a cable receiver Try to get a Technisat receiver via eBay. even if the internal hard disk is defect it's no problem because nearly every 3,5" Hard disk with a SATA interface works flawless if used as a spare part! Just replace the drive and go into the service menu of the technisat and format the drive and everything is fine You get two independant tuners
    Posted to General Discussion & Questions (Forum) by RaMaBo on Mon, Oct 7 2019
  • Re: Beolab 2000 startet Beocenter 9300 nicht

    [quote user="Boardman"] 7-Polig? Ich habe eine normales Powerlink kabel dran... [/quote] Da haben wir es schon: der Beolink Converter setzt von Audio um nach Masterlink! Also wie folgt Anschließen: BC 9300 (Aux/TV) --> 7-poliges Kabel --> Beolink Converter (A.AUX) --> Masterlink --> Beolab 2000 Dann funzt auch die BC 9300 Bedienung vom Beolab 2000 aus (direkt oder mit Fernbedienung) [quote]: DIN 5 Polig mit 3,5 Klinke in Buchse Audio Aux in 1611 Converter gesteckt. bei
    Posted to Deutsche BeoWorld (Forum) by RaMaBo on Fri, Oct 4 2019
  • Re: Beovision 7 - 32 mit Motorstand und DVD, BEO4 ohne DVD taste

    Hallo, bei meinem Beocenter 2500 ( =Beosystem 2500 ohne Beolab 2500) gibt's auch keine Masterlink Buchse. Für Anschluß wird benötigt: - ein A.Aux Link Kabel ( 7polig!) - ein Powerlink Kabel (damit direkte Bedienung am BC2500 dem VideoMaster mitgeteilt wird, im Endeffekt wird nur der Speaker Mute Anschluß verwendet) - Beolink Converter 1611 - Masterlinkkabel Ein BC 2500 hat links unter der Glasscheibe ein abgerundetes IR Fenster und rechts die Kopfhörer Buchse. Eine
    Posted to Deutsche BeoWorld (Forum) by RaMaBo on Fri, Oct 4 2019
  • Re: Beovision 7 - 32 mit Motorstand und DVD, BEO4 ohne DVD taste

    Hallo, der BV7-32 muß noch auf V.Opt 2 und die Beosound2500 auf A.Opt 0 gesetzt werden. Auf diese Weise empfängt nur noch der VideoMaster die IR Signale und routet die entsprechend zu seinem Video-Teil oder auf den Masterlink Bus zum Audiomaster. Hierzu müssen beide Systeme im StandBy sein!. Bestätigung erfolgt an jedem entsprechenden Gerät durch kurzes Blinken der StandBy LED. Hmm, der BG6500 sollte zumindest mit einem speziellen AudioAux T-Stück funktionieren: BL1611
    Posted to Deutsche BeoWorld (Forum) by RaMaBo on Fri, Oct 4 2019
  • Re: Usb Service tool

    Better leave it at 1,5 GHz, not too much difference. Put old BIOS chip in new Board and load defaults. That should be all.
    Posted to Beomaster & Beosound 5 Forum (Forum) by RaMaBo on Wed, Oct 2 2019
  • Re: Beolab 2000 startet Beocenter 9300 nicht

    Sieben poliges Kabel verwendet? Dann sollte es laufen. Alles stromlos machen, dann 9300 an Strom, dann Beolab 2000 an Strom und zuletzt den BeoLink Converter an den Strom hängen, jeweils ca 1 Minute warten
    Posted to Deutsche BeoWorld (Forum) by RaMaBo on Wed, Oct 2 2019
  • Re: Beosound 3000 with masterlink

    Hi, Masterlink does not sitch on the distributed speakers. The Beolab 2000 for example has to be switched on with the Button 'Play' and plays then the source which is selected on the Beosound 3000. the buttons 'Radio', 'Tape', 'CD' can select the corresponding source and the sound will be transported by the masterlink cable to this speaker if the whole system was in standby. The option setting is needed to activate/deactivate the IR reception of the corresponding device
    Posted to General Discussion & Questions (Forum) by RaMaBo on Fri, Sep 20 2019
  • Re: Crowd-sourcing a history lesson about volume control

    Hi Geoff, to make things more complicated there are two versions of some Devices: BeoMaster 1900 / 2400 and 1900-2 / 2400-2. Both had digital volume control in 1976-1983. The Beomaster 1900 / 2400 (later with a remote control equipped) had a 16 step volume controll but no numbered readout. The later version (1900-2/2400-2) was a bit more sophisticated with a 127 steps volume control. The difference in this case is not a technical one but just a later redesign (due to customer request?) In the begining
    Posted to General Discussion & Questions (Forum) by RaMaBo on Tue, Sep 17 2019
  • Re: Sound Playback Issue - Low voice

    Hi, if you have set the speaker value to '5' there's a speker missing: Where's your center speaker??? The voices will be mostly played via the center speaker. If you don't want a center speaker you can select 'Speaker 4' to get the voices back. If you select 'Speaker 1' you will hear nothing if no center speaker connected and defined.
    Posted to General Discussion & Questions (Forum) by RaMaBo on Fri, Sep 13 2019
  • Re: Looking for TV Software of old Avant CRT 32 RF

    Ok, i can burn an EPROM and send it to you. Cost will be just for the postage. But i doubt that it will help much for your problem because the TV itself works, just shuts down at random times.. Send me a PM if you still want the chip with the 10.2 Software.
    Posted to BeoWorld Private Wanted (Forum) by RaMaBo on Fri, Sep 13 2019
Page 2 of 56 (555 items) < Previous 1 2 3 4 5 Next > ... Last ยป | More Search Options
Beoworld Security Certificate

SSL