Sign in   |  Join   |  Help

Search

  • Re: Beosystem 3 - Projector control

    hi joakim! the rs232 connection on the bs3 is for the cinema control and is assigned as follows: Cinema Control connector Pin 1 N.C. Pin 2 N.C. Pin 3 N.C. Pin 4 N.C. Pin 5 GND Pin 6 Cinema control 1 timer (Open Collector Output 1)* Pin 7 Cinema control 2 timer (Open Collector Output 2)* Pin 8 Third party lift (high when lift should be raised) (Open Collector Output 3)* Pin 9 Cinemascope screen signalling (Open Collector Output 4)* *) During power up and power down no changes are allowed on output
    Posted to General Discussion & Questions (Forum) by beoandy on Wed, Jun 16 2021
    Filed under: bs3 cinema
  • Re: Black spot on Moment screen

    hi, you can see it on this video... https://youtu.be/vK4PC1hsvpM
    Posted to General Discussion & Questions (Forum) by beoandy on Sat, Apr 24 2021
  • Re: Beo 6 speaker

    if you spinn the volume wheel or press a button on the screen you can hear it click. that's what the speaker is for!
    Posted to The Beo5/6 Remote Forum (Forum) by beoandy on Thu, Mar 4 2021
  • Re: Beosystem 4 - change display

    [quote user="beojeff"] [quote user="beoandy"] hi, you can use any Atlona AT-HD4-V42. there is no specific firmware or version. (info from b&o and atlona support) I use the Atlona AT-HD4-V42 with the beosystem 4 with projector and a upgraded beovision 9 (with deactivated beosystem 3). When the beosystem 4 detects the AT-HD4-V42 on the hdmi output, an additional menu appears for the two hdmi outputs . do you know the service manual for the cinema (2nd screen) installation of
    Posted to General Discussion & Questions (Forum) by beoandy on Sun, Jan 10 2021
  • Re: Beosystem 4 - change display

    [quote user="beojeff"]I had had extensive emails with BeoCare about this very issue. This is from one of their emails to me: One of our technicians just confirmed that it has to be the special B&O version of the Atlona splitter as this has different firmware installed. Unfortunately, it is not possible to use the non-B&O version." [/quote] hi beojeff! very strange - as already written beocare and the support from atlona have confirmed it to me differently by email. beocare
    Posted to General Discussion & Questions (Forum) by beoandy on Sun, Jan 10 2021
  • Re: Beosystem 4 - change display

    [quote user="beojeff"]It's possible that you might actually have the B&O firmware. Both B&O and Atlona advised that the switch needs the B&O firmware for it to be recognized. I sent mine to Atlona and they returned it to me after flashing it with the B&O firmware.[/quote] hi beojeff! but that would be extremely luck if both have the b&o firmeware. back then i had bought two atlona AT-HD4-V42s from different retailers on ebay. both work. beoandy
    Posted to General Discussion & Questions (Forum) by beoandy on Sun, Jan 10 2021
  • Re: Beosystem 4 - change display

    hi, you can use any Atlona AT-HD4-V42. there is no specific firmware or version. (info from b&o and atlona support) I use the Atlona AT-HD4-V42 with the beosystem 4 with projector and a upgraded beovision 9 (with deactivated beosystem 3). When the beosystem 4 detects the AT-HD4-V42 on the hdmi output, an additional menu appears for the two hdmi outputs . do you know the service manual for the cinema (2nd screen) installation of the beosystem 4? beoandy
    Posted to General Discussion & Questions (Forum) by beoandy on Sat, Jan 9 2021
  • Re: BeoLiving news & support from Khimo!

    [quote user="Emil Jensen"] Is this possible: I walk into my bathroom, a sensor sees that someone is in the room, turn on the lights and start playing radio on the Beoplay M3 And if so, want movement sensor do you recommend that I can buy in Denmark. And I have seen Philips Hue have one, can that be used? [/quote] hello emil. easier, and cheaper if you don't have a knx system yet, you can do this via phillips hue. the hue motion sensor detects movement and switches a hue lamp on to 100
    Posted to Bang & Olufsen / Home Automation (Forum) by beoandy on Thu, Jan 7 2021
  • Re: Beolab 5000 Display aus

    hi! generell brauchst du bei den beolabs mit display voll-belegte powerlinkkabel. müssten die mk2 sein. bei den bl5000 und bl4500 ist dann zusätzlich seitlich am display ein schwarzer schiebeschalter. dieser muss auf audio (nicht video oder stand-by) stehen. müsste die mittlere einstellung sein. (sollte nur stromlos geschalten werden) generell müsste das beocenter 2 "alt genug" sein und die displaydaten an die bl5000 ausgeben. lg beoandy
    Posted to Deutsche BeoWorld (Forum) by beoandy on Wed, Nov 11 2020
  • Re: Analoger Eingang Beosysyem 4

    hi, lt. service manual vom bv12-65 mit bs4 hat der analoge input folgende belegung: 9-pin Mini-DIN-Shielded Pin 1 - R Pin 2 - G Pin 3 - B Pin 4 - CVBS Pin 5 - FB Pin 6 - 1-AVL Pin 7 - Audio L Pin 8 - GND Pin 9 - Audio R Case - Case belegung: 12 3456 789 lg beoandy
    Posted to Deutsche BeoWorld (Forum) by beoandy on Sat, Oct 3 2020
Page 1 of 24 (234 items) 1 2 3 4 5 Next > ... Last ยป | More Search Options
Beoworld Security Certificate

SSL