Sign in   |  Join   |  Help

Search

  • Re: Beolab 50 is so unstable with me...

    So I was finally home again to test the wired setup. I plugged in a network cable and one speaker (the master) started to ply straight away. So I did a factory reset in the 50's and now everything is working fine again. I did a room compensation calibration with the mic and created a few presets. (Movies and Hi-Fi) Now let's hope all stays fine with the wired connection. If anything does go wrong again I will report back, so no news is good news! Thanks for all your help and support. Peter
    Posted to General Discussion & Questions (Forum) by Peter Dorr on Sat, Mar 23 2019
  • Re: Beolab 50 is so unstable with me...

    Thanks all I will indeed go through the nasty process of adding a network cable through my setup. It needs a few hours of cabling work unfortunstely due to a nasty setup of my living. I am comfortable that the wifi issue will be solved. As for the Marantz/no sound issue. I will change RCA outputs to see if that helps. Otherwise I am still puzzled. Thanks guys for your support Much appreciated
    Posted to General Discussion & Questions (Forum) by Peter Dorr on Wed, Mar 13 2019
  • Beolab 50 is so unstable with me...

    If they work they sound absolutely fab. but..... quite often I have one of these two problems (or even both) 1) No wifi connection, so no way of controlling it via the app. where as my home wifi network is stable. 2) No sound/activity at all. They are connected through a high end RCA cable to my Marantz SR8012 receiver. and it drives me crazy up to the level as being ready to sell them off. Despitethe great sound. any thoughts, help? thanks Peter
    Posted to General Discussion & Questions (Forum) by Peter Dorr on Wed, Mar 13 2019
  • Re: Beolab50 has big audio delay vs Beosound 8000 -Pls Help-

    Sure, I got that. Thanks It can "only" be set to 10 meters and I found that actually putting it to 0 works best for me. I really do not know how it solved my issue but when I disconnected the center speaker from the system I get the desired sound, including nicely timed Atmos and Surround speakers. Since my Beolab 50's are only 2,5 meters apart, next to the TV (not too big a living room) I decided to take that loss and go without a center speaker.Maybe one day I will get a bright moment
    Posted to General Discussion & Questions (Forum) by Peter Dorr on Sun, Dec 23 2018
  • Re: Beolab50 has big audio delay vs Beosound 8000 -Pls Help-

    Thanks Mr 10percent, great idee. So I immediately went into the Marantz SR8012 setup menu but unfortunately I can only set speaker distances to a maximum of 18 meters, so hardly any noticable difference. Damn it seemed such a promissing idea
    Posted to General Discussion & Questions (Forum) by Peter Dorr on Sun, Dec 23 2018
  • Re: Beolab50 has big audio delay vs Beosound 8000 -Pls Help-

    Well I fixed it (kind of I guess). So it took 3 consecutive complete factory resets in order to finally get access to my Beolab50's. I created a new preset with the narrow beam and Latency set to Low. I reduced the level of the center speaker with -9dB and increased both Beolab 50's with +3dB. The delay is still there, all be it less noticeable then before.I wish I could set the latency per speaker through my Receiver (Marantz SR8012) in order to get everything pitch perfect but I am afraid
    Posted to General Discussion & Questions (Forum) by Peter Dorr on Sat, Dec 22 2018
  • Cannot wake up my Beolab 50 through the app

    It has worked before but now I just cannot connect to my Beolab 50's anymore. The app says it is waking the BL50's up but I cannot get to them. When I connect through the "products" entry, I get an error saying "We cannot reach your product". Even when they are playing. How can I reconnect without resetting everything? Thanks Peter
    Posted to General Discussion & Questions (Forum) by Peter Dorr on Fri, Dec 21 2018
  • Re: Beolab50 has big audio delay vs Beosound 8000 -Pls Help-

    Thanks guys, you are probably very right on the Latency timing. I misinterpreted that (no native english speaker) so I probably have set it to a wrong level. Now if only I could get to my Beolab50's to change it The app says it is waking them up but it never succeeds. I tried it when they were off as well as when they were playing. I doublechecked the WiFi network but nothing sees to work. And it has worked before so it drives me nuts Can I just put a network cable in one of the 3 UTP ports and
    Posted to General Discussion & Questions (Forum) by Peter Dorr on Fri, Dec 21 2018
  • Beolab50 has big audio delay vs Beosound 8000 -Pls Help-

    I have a Marantz SR8012 with 2 Beolab50's en 2 Beosound 8000's connected through pre-out. The Beolab50's have a very significant audio delay vs the 8000's when in Dolby + or any other surround sound setting. I tried every setting in the AV Receiver but nothing helps. Any suggestions how to adjust it in the speakers perhaps? Many thanks Peter
    Posted to General Discussion & Questions (Forum) by Peter Dorr on Mon, Dec 17 2018
  • Re: How to reduce the treshold on beolab 50?

    Thank you all for your answers and in the end the solution was much simpler than I expected. As I wrote in my original post I figured out that I had to reduce the treshold myself already. The problem was that when I clicked on the dbV number in the app I could not adjust it, but when I clicked on the words "Detect Treshold" a slider appears. I only found the latter out by accident today. Now I can adjust it so I am sure the problem will easily be solved by changing it. Thanks again for
    Posted to General Discussion & Questions (Forum) by Peter Dorr on Sun, Nov 25 2018
Page 1 of 3 (21 items) 1 2 3 Next > | More Search Options
Beoworld Security Certificate

SSL